Skip to end of metadata
Go to start of metadata

Download PDF Document

2018-11-07

v. 43.2.1343


1 Firmware Pack

The firmware pack is a ZIP file that contains the modules and the features to install on your Mediatrix unit when a new release is available.

When unzipping the firmware pack, the content is extracted according to a pre-defined tree architecture. This creates a directory that contains the files required for the Mediatrix unit to properly upgrade its firmware.


2 New Functionalities


Incident #CR #SynopsisApplies To
Description

IN-13752



DGW-9343The MAC address must be present in the CWMP INFORM message.CWMP TR-069

The Device.LAN.MACAddress TR-069 parameter is now present in all CWMP INFORM messages.

IN-13430

DGW-9151Support the %serial% macro for the serial number.Cert, Conf, SipEp, and Hoc

The %serial% macro is now supported for the serial number.

---DGW-8778Added support of security mechanism agreement" (RFC 3329) for media (draft-dawes-sipcore-mediasec-parameter-08).SipEp

The security mechanism agreement for media as defined in draft-dawes-sipcore-mediasec-parameter-08 and RFC 3329 is now supported. The feature can be activated with the SipEp.MediaSecurityAgreementEnable parameter.



3 Modified Features, Functionalities and Interface Modifications


Incident #CR #SynopsisApplies To
Description

IN-13752



DGW-9343The MAC address must be present in the CWMP INFORM message.CWMP TR-069

The Device.LAN.MACAddress parameter is now always set to "Always Active", i.e. the MAC address is now provided in all CWMP INFORM messages

---DGW-9319Vulnerability on Web pages may cause unexpected behavior.Web


IN-13430

DGW-9151Support the %serial% macro for the serial number.Cert, Conf, SipEp, and Hoc

The %serial% macro is now supported for the serial number.

---DGW-8778Added support of security mechanism agreement" (RFC 3329) for media (draft-dawes-sipcore-mediasec-parameter-08).SipEp

The new SipEp.MediaSecurityAgreementEnable parameter is available in the DGW Web page under the SIP/Misc/Security Mechanism Agreement table and by the CWMP protocol.



4 Issues Fixed


Incident #CR #SynopsisApplies To
Description

IN-13757

DGW-9354With the Sentinel 400, the SNMPWalk does not return the full information when it is executed on mib-2 elements.SNMP

While performing an SNMPWalk on a Sentinel 400, the full information for mib-2 are now returned.

---DGW-9319Vulnerability on Web pages may cause unexpected behavior.Web

Add protection to fix this vulnerability on all Web pages.

---DGW-8477The partially converted image is displayed under the Management/Files DGW Web page when the VM conversion is interrupted.VM

During VM conversion, the partially converted image will no longer be displayed in the DGW Web under Management/Files. Once the conversion is completed, the VM converted image will be displayed in the DGW Web page under Management/Files.



5 Known Issues


Incident #CR #SynopsisApplies To



6 Copyright Notice

Copyright © 2018 Media5 Corporation.

This document contains information that is proprietary to Media5 Corporation.

Media5 Corporation reserves all rights to this document as well as to the Intellectual Property of the document and the technology and know-how that it includes and represents.

This publication cannot be reproduced, neither in whole nor in part, in any form whatsoever, without written prior approval by Media5 Corporation.

Media5 Corporation reserves the right to revise this publication and make changes at any time and without the obligation to notify any person and/or entity of such revisions and/or changes.