Skip to end of metadata
Go to start of metadata

Download PDF Document

2018-11-07

For Mediatrix Sentinel and Mediatrix 3000 Units

v. 43.2.1343


1 Call Agent Rulesets

Name Description
automatic_media_relay Media goes through the SBC except for users in the same network.
drop_common_scanners_in Drop requests from known SIP scanners.
drop_register_in Drop all inbound registration requests.
drop_unregistered_users_in Drop inbound requests from unregistered users.
media_relay Force Media to go through the SBC.
rate_limit_invite_per_source_in Limit call attempts per second per source IP address.
rate_limit_register_per_source_in Limit registration attempts per minute per source IP address.
register_cache_out Create alias in cache for outbound registrations and restore the contact from the cache for inbound requests.
registrar_in Store contact locally and reply to inbound registration requests.
registration_throttling_in Use different expiration for UA and registrar.
reject_unregistered_users_in Reject inbound requests from unregistered users.
remote_users_behind_nat Handle Far-End NAT for registrations and calls.
topology_hiding_out Remove user-agent or server header on outbound requests.
uac_authentication_out Provide authentication credentials for outbound requests.

2 Routing Rulesets

Name Description
lan_pbx_to_remote_users Route from lan_ip_pbx_ca to remote_users_ca
lan_pbx_to_wan_ip_trunk_failover_to_second Route from lan_ip_pbx_ca to wan_ip_trunk_ca with failover to secondary_ip_trunk_ca
lan_pbx_to_wan_ip_trunk_failover_to_second_dm Route from lan_ip_pbx_cato wan_ip_trunk_ca with failover to secondary_ip_trunk_ca in demarcation setup.
lan_pbx_to_wan_ip_trunk_failover_to_trunk_dm Route from lan_ip_pbx_ca to wan_ip_trunk_ca with failover to trunk_lines_ca in demarcation setup
local_users_to_wan_ip_trunk_failover_to_second Route from local_users_ca to wan_ip_trunk_ca with failover to secondary_ip_trunk_ca.
registration_to_wan_ip_trunk_failover_to_second Route from registration_ca to wan_ip_trunk_ca with failover to secondary_ip_trunk_ca
registration_to_wan_ip_trunk Route from registration_ca to wan_ip_trunk_ca
remote_users_to_lan_pbx Route from remote_users_ca to lan_ip_pbx_ca
secondary_ip_trunk_to_lan_pbx Route from secondary_ip_trunk_ca to lan_ip_pbx_ca
trunk_lines_to_local_pbx_dm Route from trunk_lines_ca to lan_ip_pbx_ca in demarcation setup
wan_ip_trunk_to_lan_pbx Route from wan_ip_trunk_ca to lan_ip_pbx_ca

3 Documentation

Mediatrix units are supplied with an exhaustive set of documentation.

Mediatrix user documentation is available on the Documentation Portal .

Several types of documents were created to clearly present the information you are looking for. Our documentation includes:

  • Release notes: Generated at each GA release, this document includes the known and solved issues of the software. It also outlines the changes and the new features the release includes.
  • Configuration notes: These documents are created to facilitate the configuration of a specific use case. They address a configuration aspect we consider that most users will need to perform. However, in some cases, a configuration note is created after receiving a question from a customer. They provide standard step-by-step procedures detailing the values of the parameters to use. They provide a means of validation and present some conceptual information. The configuration notes are specifically created to guide the user through an aspect of the configuration.
  • Technical bulletins: These documents are created to facilitate the configuration of a specific technical action, such as performing a firmware upgrade.
  • Hardware installation guide: They provide the detailed procedure on how to safely and adequately install the unit. It provides information on card installation, cable connections, and how to access for the first time the Management interface.
  • User guide: The user guide explains how to customise to your needs the configuration of the unit. Although this document is task oriented, it provides conceptual information to help the user understand the purpose and impact of each task. The User Guide will provide information such as where and how TR-069 can be configured in the Management Interface, how to set firewalls, or how to use the CLI to configure parameters that are not available in the Management Interface.
  • Reference guide: This exhaustive document has been created for advanced users. It includes a description of all the parameters used by all the services of the Mediatrix units. You will find, for example, scripts to configure a specific parameter, notification messages sent by a service, or an action description used to create Rulesets. This document includes reference information such as a dictionary, and it does not include any step-by-step procedures.


4 Copyright Notice

Copyright © 2018 Media5 Corporation.

This document contains information that is proprietary to Media5 Corporation.

Media5 Corporation reserves all rights to this document as well as to the Intellectual Property of the document and the technology and know-how that it includes and represents.

This publication cannot be reproduced, neither in whole nor in part, in any form whatsoever, without written prior approval by Media5 Corporation.

Media5 Corporation reserves the right to revise this publication and make changes at any time and without the obligation to notify any person and/or entity of such revisions and/or changes.