If you are not familiar with the meaning of the fields and buttons, click
, located at the upper right corner of the Web page. When activated, the fields and buttons that offer online help will change to green and if you hover over them, the description will be displayed.
Go to SBC
In the Call Agent Configuration
located on the same row as remote_users_ca
In the Configure Call Agent
table, complete the following fields:
- Select the Enable
- From the Signaling Interface
selection list, select uplink_s
- From the Media Interface
selection list, select uplink_m
- Set the Peer Network
From the Name
selection list, choose rate_limit_register_per_source_in
In the Configuration
page, click Save
to apply all changes to the configuration.
will be displayed in
indicating that the configuration that was modified is now applied to the system. When
the Mediatrix SBC unit will use the selected Call Agent for a communication, the
selected parameters will be applied.