- Sentinel 100
- Sentinel 400
- Mediatrix S7 and S7 LP Series
- Mediatrix G7 Series
- Mediatrix C7 Series
- Mediatrix 4100 Series
- Mediatrix 3000 Series
- Mediatrix 4400 Series
- Mediatrix LP Series
Dgw2.0 firmware can be downloaded from Media5 Support Portal. If you do not have an account to access Media5 Support Portal, please contact your Mediatrix product dealer or Media5 TAC if you have an SLA contract.
Before starting to use these configuration notes, complete the following table to make sure you have the required information to complete the different steps.
These configuration notes can be successfully executed, provided your unit is using the Factory default settings.
|Information||Value||Used in Step|
|IP address used by your Mediatrix unit to communicate with the Management
||USE this value 192.168.0.10||Logging on to the Mediatrix Unit Web Interface|
||Logging on to the Mediatrix Unit Web Interface|
||Locate the IP Link Local label underneath your Mediatrix unit.||Logging on to the Mediatrix Unit Web Interface|
|Port number used||Adding the Mediatrix FXO, E1-T1 or PSTN Gateway to the 3CX Server|
|MAC address of the Mediatrix unit||Exporting the 3CX Configuration Script to your PC|
|Name of your Mediatrix unit||Adding the Mediatrix FXO, E1-T1 or PSTN Gateway to the 3CX Server|
You do not need to restart the 3CX server.
If you select a Register/Account based type of authentication, the Mediatrix Gateway will later be configured to create a Unit Registration towards the 3cx server, using the Authentication ID that is defined in the Authentication area of the 3cx
The MAC address of the device is used in the filename of the configuration file created by 3CX. Refer to Locating the MAC Address of Your Mediatrix Unit.
You may not be able to log on to the Mediatrix unit Web interface if you are using older browser versions. The computer's network card must be on the same subnet as the Mediatrix unit.
The public username account has administrator rights.
You can also use admin as a username and administrator as password.
The Uplink Network Interface must be set with a fixed public IP address for the NAT/router to be able to do port-forwarding to the unit. It will also be easier for the PBX to communicate with the unit if the address is static.
the static IP address is in the form of IP address/subnet mask length, e.g. 192.168.1.141/24
Once the changes are applied, the connection with the unit might be lost. You may need to reconnect to the Web page using the new address.
If you are not familiar with the meaning of the fields and buttons, click Show Help, located at the upper right corner of the Web page. When activated, the fields and buttons that offer online help will change to green and if you hover over them, the description will be displayed.
The privacy key must match the privacy key used to encrypt the file.
Mediatrix units are supplied with an exhaustive set of documentation.
Mediatrix user documentation is available on the Documentation Portal .
Several types of documents were created to clearly present the information you are looking for. Our documentation includes:
Copyright © 2018 Media5 Corporation.
This document contains information that is proprietary to Media5 Corporation.
Media5 Corporation reserves all rights to this document as well as to the Intellectual Property of the document and the technology and know-how that it includes and represents.
This publication cannot be reproduced, neither in whole nor in part, in any form whatsoever, without written prior approval by Media5 Corporation.
Media5 Corporation reserves the right to revise this publication and make changes at any time and without the obligation to notify any person and/or entity of such revisions and/or changes.