Available DGW Firmware Versions
1 Firmware Pack
The firmware pack is a binary file that contains the modules and the features to install on your Mediatrix unit when a new release is available.
2 New Functionalities
| Incident # | CR # | Synopsis | Applies To |
|---|---|---|---|
| Description | |||
IN-13752 |
DGW-9343 | The MAC address must be present in the CWMP INFORM message. | CWMP TR-069 |
The Device.LAN.MACAddress TR-069 parameter is now present in all CWMP INFORM messages. |
|||
IN-13430 |
DGW-9151 | Support the %serial% macro for the serial number. | Cert, Conf, SipEp, and Hoc |
The %serial% macro is now supported for the serial number. |
|||
| --- | DGW-8778 | Added support of security mechanism agreement" (RFC 3329) for media (draft-dawes-sipcore-mediasec-parameter-08). | SipEp |
The security mechanism agreement for media as defined in draft-dawes-sipcore-mediasec-parameter-08 and RFC 3329 is now supported. The feature can be activated with the SipEp.MediaSecurityAgreementEnable parameter. |
|||
3 Modified Features, Functionalities and Interface Modifications
| Incident # | CR # | Synopsis | Applies To |
|---|---|---|---|
| Description | |||
IN-13752 |
DGW-9343 | The MAC address must be present in the CWMP INFORM message. | CWMP TR-069 |
The Device.LAN.MACAddress parameter is now always set to "Always Active", i.e. the MAC address is now provided in all CWMP INFORM messages |
|||
| --- | DGW-9319 | Vulnerability on Web pages may cause unexpected behavior. | Web |
IN-13430 |
DGW-9151 | Support the %serial% macro for the serial number. | Cert, Conf, SipEp, and Hoc |
The %serial% macro is now supported for the serial number. |
|||
| --- | DGW-8778 | Added support of security mechanism agreement" (RFC 3329) for media (draft-dawes-sipcore-mediasec-parameter-08). | SipEp |
The new SipEp.MediaSecurityAgreementEnable parameter is available in the DGW Web page under the SIP/Misc/Security Mechanism Agreement table and by the CWMP protocol.
|
|||
4 Issues Fixed
| Incident # | CR # | Synopsis | Applies To |
|---|---|---|---|
| Description | |||
| --- | DGW-9642 | Synopsis is missing in issue RN (DGW-9642) | all |
The parameters in Hardware service are not converted if downgrading from DGW 43.2 (or lower). It is recommended to upgrade to DGW 43.3 prior to downgrading to any of these older DGW versions. |
|||
IN-13757 |
DGW-9354 | With the Sentinel 400, the SNMPWalk does not return the full information when it is executed on mib-2 elements. | SNMP |
While performing an SNMPWalk on a Sentinel 400, the full information for mib-2 are now returned. |
|||
| --- | DGW-9319 | Vulnerability on Web pages may cause unexpected behavior. | Web |
Add protection to fix this vulnerability on all Web pages. |
|||
| --- | DGW-8477 | The partially converted image is displayed under the Management/Files DGW Web page when the VM conversion is interrupted. | VM |
During VM conversion, the partially converted image will no longer be displayed in the DGW Web under Management/Files. Once the conversion is completed, the VM converted image will be displayed in the DGW Web page under Management/Files. |
|||
5 Known Issues
| Incident # | CR # | Synopsis | Applies To |
|---|
6 Copyright Notice
Copyright © 2019 Media5 Corporation.
This document contains information that is proprietary to Media5 Corporation.
Media5 Corporation reserves all rights to this document as well as to the Intellectual Property of the document and the technology and know-how that it includes and represents.
This publication cannot be reproduced, neither in whole nor in part, in any form whatsoever, without written prior approval by Media5 Corporation.
Media5 Corporation reserves the right to revise this publication and make changes at any time and without the obligation to notify any person and/or entity of such revisions and/or changes.
Overview
Content Tools
Apps