In a specific scenario, the unit registration status is not shown in status table if an endpoint and the unit username are the same.
Unable to create two signaling interfaces if the first interface created is using TLS and second interface using UDP with port 5060.
The limit of VMs has been increased.
The device does not support the presence of rtcp-xr without an argument in SDP body.
An AES256-encrypted script or backup may trigger a memory access error when executing or restoring
Allow Advanced Routing on the web interface when IPv4 Forwarding is disabled.
New Cert.InstallCertificate command
DGW-14721 - New Cert.InstallCertificate command
A new command, Cert.InstallCertificate,is now available.This command directly uses the Base64 content of a certificate, so it can be imported in the Mediatrix unit without requiring an external server repository.
It is recommended to use this command within a configuration script, or through the CLI.
DGW-14682 - Allow Advanced Routing on the web interface when IPv4 Forwarding is disabled.
On the web interface, the Advanced IP Routes table was only available if IPv4 forwarding was enabled. However, some valid source routing scenarios require the Advanced IP Routes without necessarily having forwarding enabled. The Advanced Routing table is now editable without regard to the IPv4 forwarding status.
DGW-14494 - The limit of VMs has been increased.
The limit of virtual machines that can be created on a Sentinel 400 is now increased to 10. The maximum number of VMs that can run simultaneously is increased to 3.
DGW-14616 - An AES256-encrypted script or backup may trigger a memory access error when executing or restoring
A data length validity check was added to make sure corrupted input data is not sent to the decryption function. This prevents a potentially unsafe invalid memory access in the openssl library that could have happened under rare circumstances (e.g., corrupted network packet received) when executing scripts or restoring backups that have been encrypted with AES256.
DGW-14615 - The device does not support the presence of rtcp-xr without an argument in SDP body.
Incident Number: IN-15160
The device now correctly supports the presence of rtcp-xr without arguments in SDP body.
DGW-14484 - Unable to create two signaling interfaces if the first interface created is using TLS and second interface using UDP with port 5060.
It is now possible to create a second signaling interface using UDP on port 5060when the first interface is using TLS.
DGW-14472 - In a specific scenario, the unit registration status is not shown in status table if an endpoint and the unit username are the same.
In a specific scenario, the unit registration status will not be shown if the unit registration and endpoint registration username share the same name. If both users are registered according to the status table and the endpoint registration is disabled and refresh then the unit registration status will no longer be shown.
There are no known issues.
Copyright 2021 Media5 Corporation.
This document contains information that is proprietary to Media5 Corporation.
Media5 Corporation reserves all rights to this document as well as to the Intellectual Property of the document and the technology and know-how that it includes and represents.
This publication cannot be reproduced, neither in whole nor in part, in any form whatsoever, without written prior approval by Media5 Corporation.
Media5 Corporation reserves the right to revise this publication and make changes at any time and without the obligation to notify any person and/or entity of such revisions and/or changes.