<!DOCTYPE html
SYSTEM "about:legacy-compat">
<html lang="en"><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8"><meta charset="UTF-8"><meta name="copyright" content="(C) Copyright 2023"><meta name="DC.rights.owner" content="(C) Copyright 2023"><meta name="DC.type" content="concept"><meta name="description" content="This document outlines the configuration steps required to connect a Mediatrix unit to an Asterisk open-source telephone system."><meta name="prodname" content="Mediatrix Unit with FXO Card"><meta name="version" content="DGW 49.12.28842941"><meta name="DC.date.modified" content="2023-0308-2809"><meta name="DC.date.issued" content="2023-0308-2809"><meta name="DC.date.available" content="2023-0308-2809"><meta name="ChapterNumbering" content="no"><meta name="DC.format" content="HTML5"><meta name="DC.identifier" content="concept_q2d_f2x_rs"><link href="https://fonts.googleapis.com/css?family=Open+Sans" rel="stylesheet"><link rel="stylesheet" type="text/css" href="https://documentation.media5corp.com/download/attachments/45481987/commonltr.css"><link rel="stylesheet" type="text/css" href="https://documentation.media5corp.com/download/attachments/45481987/custom.css"><title>Basic FXO Mediatrix Unit Configuration with Asterisk</title></head><body><header role="banner"><div class="topicmeta title">Basic FXO Mediatrix Unit Configuration with Asterisk </div><div class="topicmeta date">2023-0308-28<09</div><div class="topicmeta product">Mediatrix Unit with FXO Card</div><div class="topicmeta version">DGW 49.12.2884<2941</div><div class="topicmeta pdf"><a href="https://documentation.media5corp.com/download/attachments/45481987/Basic%20FXO%20Mediatrix%20Unit%20Configuration%20with%20Asterisk.pdf" rel="nofollow">Download PDF Document</a></div><hr><span style="float: inline-end;"></span></header><nav role="toc"><ul><li><a href="#concept_q2d_f2x_rs">Mediatrix unit with Asterisk</a></li><li><a href="#reference_rmz_ghx_rs">Requirements</a></li><li><a href="#reference_o3x_5cp_k5">Information to Know Before Starting </a></li><li><a href="#topic_title_Configuration_of_the_PBX_Trunk_d1e16">Configuration of the PBX Trunk</a><ul><li><a href="#task_ohm_lhd_ss">Configuring the Asterisk - PBX Trunk</a></li><li><a href="#task_ewp_brk_ss">Configuring the Asterisk - PSTN Lines</a><ul><li><a href="#reference_fsw_3sl_by">Extension Description</a></li></ul></li><li><a href="#task_kn3_sz5_fs">Configuring the Default SIP Servers</a></li><li><a href="#task_uvx_pbg_jy">Configuring the Default Gateway</a></li><li><a href="#task_alq_n1g_jy">Authenticating the SIP Default Gateway</a></li><li><a href="#task_iks_t2q_ns">Restarting Services</a></li><li><a href="#task_hdx_vrx_zp">Registering a Unit to All Gateways</a></li></ul></li><li><a href="#topic_title_Configuration_of_Routes_d1e25">Configuration of Routes</a><ul><li><a href="#task_i51_y3l_ss">Creating a Route from FXO Ports to Asterisk</a></li><li><a href="#task_m1m_rv2_qs">Creating a Hunt Group - FXO</a></li><li><a href="#unique_19808992151936403292">Creating a Route from Asterisk to a FXO Hunt Group</a></li><li><a href="#task_vnh_3pl_ss">Enabling Automatic Call Activation</a></li><li><a href="#task_qlp_bbr_mfb">Configuring DTMF Transport</a></li></ul></li><li><a href="#concept_v4k_q3h_1r">DGW Documentation</a></li><li><a href="#concept_fqm_rv4_k4">Copyright Notice</a></li></ul></nav><main role="main"><article role="article" aria-labelledby="ariaid-title1"><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="nested0" aria-labelledby="ariaid-title1" id="concept_q2d_f2x_rs">
<h1 class="title topictitle1" id="ariaid-title1">Mediatrix unit with Asterisk</h1>
<div class="body conbody"><p class="shortdesc">This document outlines the configuration steps required to connect a Mediatrix unit to
an Asterisk open-source telephone system.</p>
<div class="p">In this scenario, the Mediatrix unit is used to:<ul class="ul" id="concept_q2d_f2x_rs__ul_lzw_llk_ss">
<li class="li">Interface a PBX with an IP-PBX</li>
<li class="li">Provide PSTN access via analog lines</li>
<li class="li">Provide IP connectivity to analog phones and fax machines</li>
</ul></div>
<div class="p">The Asterisk IP-PBX provides:<ul class="ul" id="concept_q2d_f2x_rs__ul_tx3_plk_ss">
<li class="li">Call routing, Dial Plan<ul class="ul" id="concept_q2d_f2x_rs__ul_ilj_qlk_ss">
<li class="li">Including routes to local PSTN gateways</li>
</ul></li>
</ul><ul class="ul" id="concept_q2d_f2x_rs__ul_vhs_rlk_ss">
<li class="li">Telephony services (voicemail, call forwarding, etc,) to IP users</li>
<li class="li">SIP Endpoints management</li>
<li class="li">Auto-Attendant</li>
</ul></div>
<br><img class="image" id="concept_q2d_f2x_rs__image_fq2_wlk_ss" src="https://documentation.media5corp.com/download/attachments/45481987/Mediatrix3000Asterisk.png" width="800"><br>
</div>
</article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic reference nested0" aria-labelledby="ariaid-title2" id="reference_rmz_ghx_rs">
<h1 class="title topictitle1" id="ariaid-title2">Requirements</h1>
<div class="body refbody">
<section class="section">
<ul class="ul" id="reference_rmz_ghx_rs__ul_efl_lhx_rs">
<li class="li">Asterisk server properly installed. </li>
<li class="li">SIP client properly configured and registered against the Asterisk IP-PBX, able to place
and receive calls.</li>
</ul>
</section>
</div>
</article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic reference nested0" aria-labelledby="ariaid-title3" id="reference_o3x_5cp_k5">
<h1 class="title topictitle1" id="ariaid-title3">Information to Know Before Starting </h1>
<div class="body refbody"><p class="shortdesc"><span class="keyword wintitle">Before starting to use these configuration
notes, complete the following table to make sure you have the required information
to complete the different steps.</span></p>
<section class="section">
<div class="note important note_important"><span class="note__title">IMPORTANT:</span> <span class="ph">If you are not familiar with the meaning of the fields and
buttons, click <span class="keyword wintitle">Show Help</span>, located at the upper right corner of
the Web page. When activated, the fields and buttons that offer online help will
change to green and if you hover over them, the description will bedisplayed.</span></div>
</section>
<section class="section">
<div class="note note note_note"><span class="note__title">Note:</span> <span class="ph">The Mediatrix unit must be reinitialised to its factory default settings to make sure the configuration can be successfully executed.</span></div>
</section>
<table class="table frame-all" id="reference_o3x_5cp_k5__table_kkj_cdp_k5"><caption></caption><colgroup><col style="width:33.33333333333333%"><col style="width:33.33333333333333%"><col style="width:33.33333333333333%"></colgroup><thead class="thead">
<tr class="row">
<th class="entry colsep-1 rowsep-1" id="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__1">Information</th>
<th class="entry colsep-1 rowsep-1" id="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__2">Value</th>
<th class="entry colsep-1 rowsep-1" id="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__3">Used in Step</th>
</tr>
</thead><tbody class="tbody">
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__1">IP address of unit</td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__2"></td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__3"><a class="xref" href="#task_ohm_lhd_ss">Configuring the Asterisk - PBX Trunk</a> and
<a class="xref" href="#task_ewp_brk_ss">Configuring the Asterisk - PSTN Lines</a></td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__1">Listening port of unit</td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__2"></td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__3"><a class="xref" href="#task_ohm_lhd_ss">Configuring the Asterisk - PBX Trunk</a> and
<a class="xref" href="#task_ewp_brk_ss">Configuring the Asterisk - PSTN Lines</a></td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__1">The SIP username used for calls coming from the PSTN</td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__2"></td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__3"><a class="xref" href="#task_ewp_brk_ss">Configuring the Asterisk - PSTN Lines</a></td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__1">The SIP username used for calls coming from the PBX</td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__2"></td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__3"><a class="xref" href="#task_ewp_brk_ss">Configuring the Asterisk - PSTN Lines</a></td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__1">SIP Username and Password to authenticate the gateway</td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__2"></td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__3"><a class="xref" href="#task_alq_n1g_jy">Authenticating the SIP Default Gateway</a></td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__1">Asterisk server IP address</td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__2"></td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__3"></td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__1">Asterisk server SIP listening port</td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__2"></td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__3"></td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__1">DTMF transport method </td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__2"></td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__3"><a class="xref" href="#task_ohm_lhd_ss">Configuring the Asterisk - PBX Trunk</a> and
<a class="xref" href="#task_ewp_brk_ss">Configuring the Asterisk - PSTN Lines</a> and <a class="xref" href="#task_qlp_bbr_mfb">Configuring DTMF Transport</a></td>
</tr>
</tbody></table>
</div>
</article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic nested0 nobody" aria-labelledby="ariaid-title4" id="topic_title_Configuration_of_the_PBX_Trunk_d1e16">
<h1 class="title topictitle1" id="ariaid-title4">Configuration of the PBX Trunk</h1>
<article class="topic task nested1" aria-labelledby="ariaid-title5" id="task_ohm_lhd_ss">
<h2 class="title topictitle2" id="ariaid-title5">Configuring the Asterisk - PBX Trunk</h2>
<div class="body taskbody">
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword cmdname">sip.config</span> configuration file, create a new extension
and add: </span>
<ol type="a" class="ol substeps" id="task_ohm_lhd_ss__substeps_vd2_csl_by">
<li class="li substep">
<span class="ph cmd">[PBXTRUNK] : The SIP username used for calls coming from the PBX.</span>
</li>
<li class="li substep">
<span class="ph cmd">type=peer</span>
</li>
<li class="li substep">
<span class="ph cmd">host= IP address of Mediatrix unit</span>
</li>
<li class="li substep">
<span class="ph cmd">port= listening port of the Mediatrix unit</span>
</li>
<li class="li substep">
<span class="ph cmd">nat=no</span>
</li>
<li class="li substep">
<span class="ph cmd">qualify=no</span>
</li>
<li class="li substep">
<span class="ph cmd">canreinvite=no</span>
</li>
<li class="li substep">
<span class="ph cmd">dtmfmode=info</span>
</li>
<li class="li substep">
<span class="ph cmd">context=FromPBX</span>
</li>
<li class="li substep">
<span class="ph cmd">secret=TrunkPassword</span>
</li>
<li class="li substep">
<span class="ph cmd">t38pt_udptl=yes</span>
</li>
</ol>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> For more information on extensions, refer to the <a class="xref" href="#reference_fsw_3sl_by">Extension Description</a>
section.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword cmdname">extensions.conf</span> file, add a context for calls coming
from the PBX. Refer to your Asterisk documentation.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword cmdname">extensions.conf</span> file, modify the context of the
extensions to allow them to send calls to the PBX. Refer to your Asterisk
documentation.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Reload the Asterisk settings by connecting to the Asterisk CLI
(<span class="keyword cmdname">asterisk -r</span>) and typing the <span class="keyword cmdname">reload</span>
command.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">If you want to use the T.38 protocol to transfer faxes, refer to the <a class="xref" href="https://documentation.media5corp.com/display/DGWLATEST/Standard+Fax+Configuration" target="_blank">Technical Bulletin - Standard Fax
Configuration</a> published on the <a class="xref" href="https://documentation.media5corp.com/" target="_blank">Media5 Documentation Portal</a>. </span>
</li></ol></section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_ewp_brk_ss">Configuring the Asterisk - PSTN Lines</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title6" id="task_ewp_brk_ss">
<h2 class="title topictitle2" id="ariaid-title6">Configuring the Asterisk - PSTN Lines</h2>
<div class="body taskbody">
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword cmdname">sip.conf </span>configuration file, create a new extension
by adding the following:</span>
<ol type="a" class="ol substeps" id="task_ewp_brk_ss__substeps_irr_l5l_by">
<li class="li substep">
<span class="ph cmd">[PSTNTrunk] = The SIP username used for calls coming from the
PSTN.</span>
</li>
<li class="li substep">
<span class="ph cmd">type= peer</span>
</li>
<li class="li substep">
<span class="ph cmd">host=IP address of Mediatrix unit</span>
</li>
<li class="li substep">
<span class="ph cmd">port=listening port of the Mediatrix unit</span>
</li>
<li class="li substep">
<span class="ph cmd">nat=no</span>
</li>
<li class="li substep">
<span class="ph cmd">qualify=no</span>
</li>
<li class="li substep">
<span class="ph cmd">canreinvite=no</span>
</li>
<li class="li substep">
<span class="ph cmd">dtmfmode=info</span>
</li>
<li class="li substep">
<span class="ph cmd">context= FromPSTN</span>
</li>
<li class="li substep">
<span class="ph cmd">secret= TrunkPassword</span>
</li>
<li class="li substep">
<span class="ph cmd">t38pt_udptl=yes</span>
</li>
</ol>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> For more information on extensions, refer to the <a class="xref" href="#reference_fsw_3sl_by">Extension Description</a>
section.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword cmdname">extensions.conf</span> file, add a context for calls coming
from the PSTN. Refer to your Asterisk documentation.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword cmdname">extensions.conf</span> file , modify the context of the PBX
to allow the PBX users to send calls to the PSTN. Refer to your Asterisk
documentation.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword cmdname">extensions.conf</span>, modify the context of the extensions
to allow them to send calls to the PBX. Refer to your Asterisk
documentation.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">You can reload the Asterisk settings by connecting to the Asterisk CLI
(<span class="keyword cmdname">asterisk –r</span>) and typing the <span class="keyword cmdname">reload</span>
command.</span>
</li></ol></section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_kn3_sz5_fs">Configuring the Default SIP Servers</a></li></ul></div></nav><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic reference nested2" aria-labelledby="ariaid-title7" id="reference_fsw_3sl_by">
<h3 class="title topictitle3" id="ariaid-title7">Extension Description</h3>
<div class="body refbody">
<section class="section">
<table class="table frame-all" id="reference_fsw_3sl_by__table_jjb_nsl_by"><caption></caption><colgroup><col style="width:50%"><col style="width:50%"></colgroup><thead class="thead">
<tr class="row">
<th class="entry colsep-1 rowsep-1" id="reference_fsw_3sl_by__table_jjb_nsl_by__entry__1">Extension</th>
<th class="entry colsep-1 rowsep-1" id="reference_fsw_3sl_by__table_jjb_nsl_by__entry__2">Description</th>
</tr>
</thead><tbody class="tbody">
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__1">[PBXTRUNK]</td>
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__2">SIP username used for calls coming from the PBX.</td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__1">[PSTNTrunk]</td>
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__2">SIP username used for calls coming from the PSTN.</td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__1">type=peer</td>
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__2">This is part of the method used by the Asterisk server to match incoming
INVITES to this user.</td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__1">host=ip address of Mediatrix unit</td>
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__2">This means the extension will not register to the Asterisk server. This is the
IP address of the Mediatrix unit.</td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__1">port=xxx</td>
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__2">Port used for requests to and from the Mediatrix unit.</td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__1">nat=no</td>
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__2">The Mediatrix unit is not behind a NAT.</td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__1">qualify=no</td>
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__2">No keep alive is used.</td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__1">canreinvite=no</td>
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__2">No reINVITE is sent to this extension.</td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__1">dtmfmode=info</td>
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__2">The DTMF is sent/received in SIP INFO messages.</td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__1">context=xxxx</td>
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__2">This is the context where the call from this extension is sent. It is the same
context for the IP phone and the Mediatrix Unit.</td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__1">secret=TrunkPassword</td>
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__2">The SIP authentication password</td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__1">t38pt_udptl=yes</td>
<td class="entry colsep-1 rowsep-1" headers="reference_fsw_3sl_by__table_jjb_nsl_by__entry__2">This allows T.38 fax to be sent by this trunk. This setting is set to no for
the IP phone and the Mediatrix unit .</td>
</tr>
</tbody></table>
</section>
</div>
</article></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title8" id="task_kn3_sz5_fs">
<h2 class="title topictitle2" id="ariaid-title8">Configuring the Default SIP Servers</h2>
<div class="body taskbody">
<section class="section context"><div class="tasklabel"><strong class="sectiontitle tasklabel">Context</strong></div>In some instances, the configuration of the default servers may already be
completed. </section>
<section id="task_kn3_sz5_fs__steps_abf_c3q_zp"><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps" id="task_kn3_sz5_fs__steps_abf_c3q_zp"><li class="li step stepexpand">
<span class="ph cmd">Go to <span class="keyword wintitle">SIP</span>/<span class="keyword wintitle">Servers</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Registrar Host</span>
field, indicate the server IP address or FQDN of the SIP Registrar server
.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Proxy Host</span>
field, indicate the server IP address or FQDN of the SIP Proxy server.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Messaging Server Host</span> field,
indicate the server IP address or FQDN of the Messaging server, if needed.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Leave the <span class="keyword wintitle">Outbound Proxy Host</span> field
empty, unless specifically instructed to set a value.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> Setting the address to 0.0.0.0:0 or leaving the field empty disables the
outbound proxy host.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Located at the top of the page, click <span class="ph uicontrol">restart required services</span>.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="task_kn3_sz5_fs__image_q5v_m1v_fs" src="https://documentation.media5corp.com/download/attachments/45481987/DefaultServers.png" width="700"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_uvx_pbg_jy">Configuring the Default Gateway</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title9" id="task_uvx_pbg_jy">
<h2 class="title topictitle2" id="ariaid-title9">Configuring the Default Gateway</h2>
<div class="body taskbody">
<section class="section prereq"><div class="tasklabel"><strong class="sectiontitle tasklabel">Before you begin</strong></div>Make sure your telephony interface has both Physical and Signalling up before
starting.</section>
<section id="task_uvx_pbg_jy__steps_i5y_vbg_jy"><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps" id="task_uvx_pbg_jy__steps_i5y_vbg_jy"><li class="li step stepexpand">
<span class="ph cmd">Go to <span class="keyword wintitle">SIP</span>/<span class="keyword wintitle">Gateways</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Gateway Configuration</span> table,
enter in the <span class="keyword wintitle">Port</span>
field, the listening port the Gateway will be using for SIP signaling if it is
different from 5060.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> The default value is 0 which stands for 5060.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span>.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="task_uvx_pbg_jy__image_bsk_s2g_jy" src="https://documentation.media5corp.com/download/attachments/45481987/GatewayConfiguration_default.png" width="800"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_alq_n1g_jy">Authenticating the SIP Default Gateway</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title10" id="task_alq_n1g_jy">
<h2 class="title topictitle2" id="ariaid-title10">Authenticating the SIP Default Gateway</h2>
<div class="body taskbody">
<section id="task_alq_n1g_jy__steps_yt1_p1g_jy"><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps" id="task_alq_n1g_jy__steps_yt1_p1g_jy"><li class="li step">
<span class="ph cmd">Go to <span class="keyword wintitle">SIP</span>/<span class="keyword wintitle">Authentication</span>.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">Authentication</span>
table, click <img class="image" id="task_alq_n1g_jy__image_xgx_mfd_ss" src="https://documentation.media5corp.com/download/attachments/45481987/pencilbleu.jpg" width="16"> located on the same line as the Default Gateway.</span>
</li><li class="li step">
<span class="ph cmd">Set the following parameters:</span>
<ol type="a" class="ol substeps" id="task_alq_n1g_jy__substeps_hjd_4fd_ss">
<li class="li substep">
<span class="ph cmd">Set <span class="keyword wintitle">Validate Realm</span> to
<span class="keyword wintitle">Disable</span>.</span>
</li>
<li class="li substep">
<span class="ph cmd">Set the <span class="keyword wintitle">User Name</span> to reflect
your configuration.</span>
</li>
<li class="li substep">
<span class="ph cmd">Set the <span class="keyword wintitle">Password</span> to reflect
your configuration.</span>
</li>
</ol>
</li><li class="li step">
<span class="ph cmd">Click <span class="keyword wintitle">Apply and Refresh
Registration</span>.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="task_alq_n1g_jy__image_ppc_bgk_ss" src="https://documentation.media5corp.com/download/attachments/45481987/Authentication_SIP_Default.png" width="800"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_iks_t2q_ns">Restarting Services</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title11" id="task_iks_t2q_ns">
<h2 class="title topictitle2" id="ariaid-title11">Restarting Services</h2>
<div class="body taskbody">
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step">
<span class="ph cmd">Go to <span class="keyword wintitle">System</span>/<span class="keyword wintitle">Services</span>.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="ph uicontrol">restart required services</span>
table, click <span class="ph uicontrol">restart required services</span>.</span>
</li></ol></section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_hdx_vrx_zp">Registering a Unit to All Gateways</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title12" id="task_hdx_vrx_zp">
<h2 class="title topictitle2" id="ariaid-title12">Registering a Unit to All Gateways</h2>
<div class="body taskbody">
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step">
<span class="ph cmd">Go to <span class="keyword wintitle">SIP</span>/<span class="keyword wintitle">Registrations</span>.</span>
</li><li class="li step" id="task_hdx_vrx_zp__2">
<span class="ph cmd">In the <span class="keyword wintitle">Unit Registration</span> table, enter in the <span class="keyword wintitle">User Name</span>, a username to
uniquely identify the user in the domain.</span>
</li><li class="li step" id="task_hdx_vrx_zp__3">
<span class="ph cmd">From the <span class="keyword wintitle">Gateway Name</span>
selection list, choose <span class="keyword wintitle">All</span>. </span>
</li><li class="li step">
<span class="ph cmd">Repeat steps <a class="xref" href="#task_hdx_vrx_zp__2">2</a> and <a class="xref" href="#task_hdx_vrx_zp__3">3</a> for each SIP account/Registration needed.</span>
</li><li class="li step">
<span class="ph cmd">Click <span class="keyword wintitle">Apply and Refresh</span>.</span>
</li><li class="li step">
<span class="ph cmd">Click <span class="ph uicontrol">restart required services</span>
located at the top of the page.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>The information will be displayed in the <span class="keyword wintitle">Unit Registration Status</span> table. <br><img class="image" id="task_hdx_vrx_zp__image_ylf_wkc_d1b" src="https://documentation.media5corp.com/download/attachments/45481987/UnitRegistration_AllGateways.png" width="800"><br></section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_i51_y3l_ss">Creating a Route from FXO Ports to Asterisk</a></li></ul></div></nav></article></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic nested0 nobody" aria-labelledby="ariaid-title13" id="topic_title_Configuration_of_Routes_d1e25">
<h1 class="title topictitle1" id="ariaid-title13">Configuration of Routes</h1>
<article class="topic task nested1" aria-labelledby="ariaid-title14" id="task_i51_y3l_ss">
<h2 class="title topictitle2" id="ariaid-title14">Creating a Route from FXO Ports to Asterisk</h2>
<div class="body taskbody">
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step">
<span class="ph cmd">Go to <span class="keyword wintitle">Call Router</span>/<span class="keyword wintitle">Route Config</span>.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">Routes</span>
table</span>
<ul class="ul choices" id="task_i51_y3l_ss__choices_g1c_kwd_2s">
<li class="li choice">click <img class="image" id="task_i51_y3l_ss__image_skd_p4d_2s" height="15" src="https://documentation.media5corp.com/download/attachments/45481987/Plusbleu.jpg"> located on the same row as an existing route to
add a route above or,</li>
<li class="li choice">click <img class="image" id="task_i51_y3l_ss__image_m1b_fwd_2s" height="15" src="https://documentation.media5corp.com/download/attachments/45481987/Plusbleu.jpg"> located at the bottom of the table to add a
route at the end of the table. </li>
</ul>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">Configure Route</span> table, set
the following parameters: </span>
<ol type="a" class="ol substeps" id="task_i51_y3l_ss__substeps_mqw_vjl_ss">
<li class="li substep">
<span class="ph cmd">Add all the FXO ports in the <span class="keyword wintitle">Sources</span> field.</span>
</li>
<li class="li substep">
<span class="ph cmd">Set <span class="keyword wintitle">Criteria Property</span>
to <span class="keyword wintitle">None</span>.</span>
</li>
<li class="li substep">
<span class="ph cmd">Set <span class="keyword wintitle">Destination</span> to <span class="keyword wintitle">sip-default</span>.</span>
</li>
</ol>
</li><li class="li step">
<span class="ph cmd">Click <span class="keyword wintitle">Save</span>.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="task_i51_y3l_ss__image_trm_kyf_qy" src="https://documentation.media5corp.com/download/attachments/45481987/Route_sipdefaultGateaway.png" width="800"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_m1m_rv2_qs">Creating a Hunt Group - FXO</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title15" id="task_m1m_rv2_qs">
<h2 class="title topictitle2" id="ariaid-title15">Creating a Hunt Group - FXO</h2>
<div class="body taskbody">
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step">
<span class="ph cmd">Go to <span class="keyword wintitle">Call Router</span>/<span class="keyword wintitle">Route Config</span>.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">Hunt</span> table,
click <img class="image" id="task_m1m_rv2_qs__image_fkl_lx2_qs" src="https://documentation.media5corp.com/download/attachments/45481987/Plusbleu.jpg" width="16">.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">Configure New Hunt</span> table, set the following:</span>
<ol type="a" class="ol substeps" id="task_m1m_rv2_qs__substeps_pyf_2y2_qs">
<li class="li substep">
<span class="ph cmd">Set the <span class="keyword wintitle">Name</span>
field to <span class="keyword wintitle">FXO</span>.</span>
</li>
<li class="li substep">
<span class="ph cmd">Using the <span class="keyword wintitle">Destinations</span>
dropbox, add all the FXO ports used in your configuration.</span>
</li>
<li class="li substep">
<span class="ph cmd">Leave the other fields with their default value.</span>
</li>
</ol>
</li><li class="li step">
<span class="ph cmd">Click <span class="keyword wintitle">Save</span>.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="task_m1m_rv2_qs__image_jg3_3m4_qy" src="https://documentation.media5corp.com/download/attachments/45481987/CreateHunt-FXO-Asterisk.png" width="800"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#unique_19808992151936403292">Creating a Route from Asterisk to a FXO Hunt Group</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title16" id="unique_19808992151936403292">
<h2 class="title topictitle2" id="ariaid-title16">Creating a Route from Asterisk to a FXO Hunt Group</h2>
<div class="body taskbody">
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step">
<span class="ph cmd">Go to <span class="keyword wintitle">Call Router</span>/<span class="keyword wintitle">Route Config</span>.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">Routes</span>
table.</span>
<ul class="ul choices" id="unique_19808992151936403292__choices_g1c_kwd_2s">
<li class="li choice">click <img class="image" id="unique_19808992151936403292__image_skd_p4d_2s" height="15" src="https://documentation.media5corp.com/download/attachments/45481987/Plusbleu.jpg"> located on the same row as an existing route to
add a route above or,</li>
<li class="li choice">click <img class="image" id="unique_19808992151936403292__image_m1b_fwd_2s" height="15" src="https://documentation.media5corp.com/download/attachments/45481987/Plusbleu.jpg"> located at the bottom of the table to add a
route at the end of the table. </li>
</ul>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">Configure Route</span> table, set
the following parameters: </span>
<ol type="a" class="ol substeps" id="unique_19808992151936403292__substeps_mqw_vjl_ss">
<li class="li substep">
<span class="ph cmd">Set <span class="keyword wintitle">Sources</span>
to <span class="keyword wintitle">sip-default</span>.</span>
</li>
<li class="li substep">
<span class="ph cmd">Set <span class="keyword wintitle">Criteria Property</span>
to <span class="keyword wintitle">None</span>.</span>
</li>
<li class="li substep">
<span class="ph cmd">Set <span class="keyword wintitle">Destination</span> to <span class="keyword wintitle">hunt_FXO</span>
.</span>
</li>
</ol>
</li><li class="li step">
<span class="ph cmd">Click <span class="keyword wintitle">Save</span>.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="unique_19808992151936403292__image_wjw_3dv_qy" src="https://documentation.media5corp.com/download/attachments/45481987/ConfigureRoute_FXOHunt.png" width="800"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_vnh_3pl_ss">Enabling Automatic Call Activation</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title17" id="task_vnh_3pl_ss">
<h2 class="title topictitle2" id="ariaid-title17">Enabling Automatic Call Activation</h2>
<div class="body taskbody">
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step">
<span class="ph cmd">Go to <span class="keyword wintitle">Telephony</span>/<span class="keyword wintitle">Services</span>.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">Select Endpoint</span>
drop down menu, select the port you want to configure.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">Automatic Call</span>
section, set the following parameters:</span>
<ol type="a" class="ol substeps" id="task_vnh_3pl_ss__substeps_i23_wpl_ss">
<li class="li substep">
<span class="ph cmd">Set <span class="keyword wintitle">Endpoint Specific</span> to
<span class="keyword wintitle">Yes</span>.</span>
</li>
<li class="li substep">
<span class="ph cmd">Set <span class="keyword wintitle">Automatic Call
Activation</span> to <span class="keyword wintitle">Enable</span>.</span>
</li>
<li class="li substep">
<span class="ph cmd">Set the <span class="keyword wintitle">Automatic Call Target</span>
to the number of the IVR configured in the Asterisk server.</span>
</li>
</ol>
</li><li class="li step">
<span class="ph cmd">Repeat the steps <strong class="ph b">2</strong> and <strong class="ph b">3</strong> for the other ports you need to
configure.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="task_vnh_3pl_ss__image_b5f_gsl_ss" src="https://documentation.media5corp.com/download/attachments/45481987/ServicesConfiguration_AutomaticCallActivation_Asterisk.png" width="800"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_qlp_bbr_mfb">Configuring DTMF Transport</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title18" id="task_qlp_bbr_mfb">
<h2 class="title topictitle2" id="ariaid-title18">Configuring DTMF Transport</h2>
<div class="body taskbody">
<section id="task_qlp_bbr_mfb__steps_tvt_hbr_mfb"><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps" id="task_qlp_bbr_mfb__steps_tvt_hbr_mfb"><li class="li step">
<span class="ph cmd">Go to <span class="keyword wintitle">Media</span>/<span class="keyword wintitle">Misc</span>.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">DTMF Transport</span>
table, set the <span class="keyword wintitle">Transport Method</span> to the one
set in the VoIP server.</span>
<ol type="a" class="ol substeps" id="task_qlp_bbr_mfb__substeps_yky_jbr_mfb">
<li class="li substep">
<span class="ph cmd"><span class="keyword wintitle">In-band</span></span>
</li>
<li class="li substep">
<span class="ph cmd"><span class="keyword wintitle">Out-of-Band using RTP</span>
(RFC2833). This is usually the preferred method. Remember to set the
payload type if different (e.g.: 96, 101 or 110 in some cases).</span>
</li>
<li class="li substep">
<span class="ph cmd"><span class="keyword wintitle">Out-of-Band using SIP</span>.
For Cisco or Avaya systems, from the <span class="keyword wintitle">SIP Transport Method</span>
field, use <span class="keyword wintitle">Info DTMF Relay</span>. For
legacy Nortel and others, leave <span class="keyword wintitle">Draft Choudhuri SIP Info Digit
00</span>. </span>
</li>
<li class="li substep">
<span class="ph cmd"><span class="keyword wintitle">Signaling Protocol Dependent</span>: choose this method if unsure. It will try to use the method
negotiated by the VoIP server.</span>
</li>
</ol>
</li><li class="li step">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span>.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="task_qlp_bbr_mfb__image_zwp_zbr_mfb" src="https://documentation.media5corp.com/download/attachments/45481987/DTMFTransport.png" width="800"><br>
</section>
</div>
</article></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic concept nested0" aria-labelledby="ariaid-title19" id="concept_v4k_q3h_1r">
<h1 class="title topictitle1" id="ariaid-title19">DGW Documentation</h1>
<div class="body conbody"><p class="shortdesc">Mediatrix devices are supplied with an exhaustive set of documentation. </p>
<p class="p">Mediatrix user documentation is available on the <a class="xref" href="http://documentation.media5corp.com" target="_blank">Media5 Documentation
Portal</a>.</p>
<div class="p">Several types of documents were created to clearly present the information you are looking for.
Our documentation includes:<ul class="ul" id="concept_v4k_q3h_1r__ul_bqy_cjh_1r">
<li class="li"><strong class="ph b">Release notes</strong>: Generated at each GA release, this document includes the known and
solved issues of the software. It also outlines the changes and the new features the release
includes.</li>
<li class="li"><strong class="ph b">Configuration notes</strong>: These documents are created to facilitate the configuration of a
specific use case. They address a configuration aspect we consider that most users will need to
perform. However, in some cases, a configuration note is created after receiving a question
from a customer. They provide standard step-by-step procedures detailing the values of the
parameters to use. They provide a means of validation and present some conceptual information.
The configuration notes are specifically created to guide the user through an aspect of the
configuration. </li>
<li class="li"><strong class="ph b">Technical bulletins</strong>: These documents are created to facilitate the configuration of a
specific technical action, such as performing a firmware upgrade.</li>
<li class="li"><strong class="ph b">Hardware installation guide</strong>: They provide the detailed procedure on how to safely and
adequately install the unit. It provides information on card installation, cable connections,
and how to access for the first time the Management interface.</li>
<li class="li"><strong class="ph b">User guide</strong>: The user guide explains how to customise to your needs the configuration
of the unit. Although this document is task oriented, it provides conceptual information to
help the user understand the purpose and impact of each task. The User Guide will provide
information such as where and how TR-069 can be configured in the Management Interface, how to
set firewalls, or how to use the CLI to configure parameters that are not available in the
Management Interface.</li>
<li class="li"><strong class="ph b">Reference guide</strong>: This exhaustive document has been created for advanced users. It
includes a description of all the parameters used by all the services of the Mediatrix units.
You will find, for example, scripts to configure a specific parameter, notification messages
sent by a service, or an action description used to create Rulesets. This document includes
reference information such as a dictionary, and it does not include any step-by-step
procedures. </li>
</ul></div>
</div>
</article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic concept nested0" aria-labelledby="ariaid-title20" id="concept_fqm_rv4_k4">
<h1 class="title topictitle1" id="ariaid-title20">Copyright Notice</h1>
<div class="body conbody"><p class="shortdesc">Copyright © 2023 Media5 Corporation.</p>
<p class="p">This document contains information that is proprietary to Media5 Corporation.</p>
<p class="p">Media5 Corporation reserves all rights to this document as well as to the Intellectual Property
of the document and the technology and know-how that it includes and represents.</p>
<p class="p">This publication cannot be reproduced, neither in whole nor in part, in any form whatsoever,
without written prior approval by Media5 Corporation.</p>
<p class="p">Media5 Corporation reserves the right to revise this publication and make changes at any time
and without the obligation to notify any person and/or entity of such revisions and/or
changes.</p>
</div>
</article></article></main></body></html> |
