<!DOCTYPE html
SYSTEM "about:legacy-compat">
<html lang="en"><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8"><meta charset="UTF-8"><meta name="copyright" content="(C) Copyright 2023"><meta name="DC.rights.owner" content="(C) Copyright 2023"><meta name="DC.type" content="reference"><meta name="description" content="Before starting to use these configuration notes, complete the following table to make sure you have the required information to complete the different steps."><meta name="prodname" content="Mediatrix units with PRI ports"><meta name="version" content="DGW 49.12.28842941"><meta name="platform" content="G7, Sentinel 100, Sentinel 400"><meta name="DC.date.modified" content="2023-0308-2809"><meta name="DC.date.issued" content="2023-0308-2809"><meta name="DC.date.available" content="2023-0308-2809"><meta name="ChapterNumbering" content="no"><meta name="DC.format" content="HTML5"><meta name="DC.identifier" content="reference_o3x_5cp_k5"><link href="https://fonts.googleapis.com/css?family=Open+Sans" rel="stylesheet"><link rel="stylesheet" type="text/css" href="https://documentation.media5corp.com/download/attachments/45481987/commonltr.css"><link rel="stylesheet" type="text/css" href="https://documentation.media5corp.com/download/attachments/45481987/custom.css"><title>Configuring the Mediatrix Unit for a Telefonica Brazil Environment</title></head><body><header role="banner"><div class="topicmeta title">Configuring the Mediatrix Unit for a Telefonica Brazil Environment</div><div class="topicmeta date">2023-0308-28<09</div><div class="topicmeta product">Mediatrix units with PRI ports</div><div class="topicmeta version">DGW 49.12.2884<2941</div><div class="topicmeta pdf"><a href="https://documentation.media5corp.com/download/attachments/45481987/Configuring%20the%20Mediatrix%20Unit%20for%20a%20Telefonica%20Brazil%20Environment.pdf" rel="nofollow">Download PDF Document</a></div><hr><span style="float: inline-end;"></span></header><nav role="toc"><ul><li><a href="#reference_o3x_5cp_k5">Information to Know Before Starting </a></li><li><a href="#concept_dt4_p3s_jq">Default Network Interfaces</a></li><li><a href="#topic_title_Configuring_the_Mediatrix_Unit_d1e17">Configuring the Mediatrix Unit</a><ul><li><a href="#task_ifw_qpc_zp">Logging on to the Mediatrix Unit Web Interface</a></li><li><a href="#task_rrr_gxw_gq">Configuring the Lan1 Network Interface</a></li><li><a href="#task_qdd_jmd_s5">Configuring the Uplink Network Interface to a static IP address</a></li><li><a href="#task_k3r_gtq_55">Configuring the Default Network Gateway to a Static IP Address</a></li><li><a href="#task_xwx_vhb_tx">Configuring the Syslog Server</a></li><li><a href="#task_g1k_xml_j5">Configuring the Domain Name Server (DNS)</a></li><li><a href="#task_ofy_g2q_5q">Configuring the SNTP Server to a Static IP Address</a></li></ul></li><li><a href="#topic_title_ISDN_Configuration_d1e25">ISDN Configuration</a><ul><li><a href="#task_ol3_sv3_5s">Auto-Detecting and Auto-Configuring ISDN Interfaces</a></li><li><a href="#task_pyd_xq4_ps">Configuring the E1T1 Interface (PRI)</a></li><li><a href="#task_q2l_pdh_tx">Configuring Interoperability </a></li><li><a href="#task_fs2_hlw_j1b">Setting ISDN Automatic Call Cancellation Timers </a></li></ul></li><li><a href="#topic_title_R2_Configuration_d1e30">R2 Configuration</a><ul><li><a href="#concept_wjt_ghv_sfb">Important information about R2-ISDN Collect Call Blockage (CCB)</a></li><li><a href="#task_r1h_rhv_sfb">Setting the Mediatrix Unit to Use the R2 Signaling Protocol</a></li><li><a href="#task_dsp_scw_sfb">Configuring R2 CAS Parameters</a></li><li><a href="#task_aw2_fgw_sfb">Overriding Country Default R2 Signaling Variants </a></li><li><a href="#unique_1389866085543523704">Overriding Country Default R2 Timers Variants </a></li><li><a href="#unique_20362213441995578344">Overriding Country Default Tone Variants </a></li></ul></li><li><a href="#topic_title_SIP_Configuration_d1e37">SIP Configuration</a><ul><li><a href="#task_dv5_zzl_4s">Configuring the SIP Proxy Server</a></li><li><a href="#task_pf2_fbc_bq">Setting SIP Interoperability Parameters</a></li></ul></li><li><a href="#topic_title_Media_Configuration_d1e40">Media Configuration</a><ul><li><a href="#task_s1h_jzf_4s">Enabling Default Codecs</a></li><li><a href="#t_configurebearercapabilities">Configuring Codec Advanced Parameters</a></li><li><a href="#task_ks2_fqt_lt">Configuring Machine Detection</a></li><li><a href="#task_wls_x1g_4s">Configuring DTMF Transport - Out of Band Using RTP</a></li></ul></li><li><a href="#topic_title_Configuring_the_Call_Router_d1e45">Configuring the Call Router</a><ul><li><a href="#task_m1m_rv2_qs">Creating a Hunt Group - PRI</a></li><li><a href="#task_xrg_gj2_4s">Creating a New Route</a></li><li><a href="#task_snj_mzt_qv">Creating a Call Property Transformation </a></li><li><a href="#task_nnz_byd_2s">Creating a Signaling Property</a></li></ul></li><li><a href="#topic_title_Restarting_Services_d1e50">Restarting Services</a><ul><li><a href="#task_iks_t2q_ns">Restarting Services</a></li></ul></li><li><a href="#reference_j4g_nbv_gfb">Online Help</a></li><li><a href="#concept_v4k_q3h_1r">DGW Documentation</a></li><li><a href="#concept_fqm_rv4_k4">Copyright Notice</a></li></ul></nav><main role="main"><article role="article" aria-labelledby="ariaid-title1"><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="nested0" aria-labelledby="ariaid-title1" id="reference_o3x_5cp_k5">
<h1 class="title topictitle1" id="ariaid-title1">Information to Know Before Starting </h1>
<div class="body refbody"><p class="shortdesc"><span class="keyword wintitle">Before starting to use these configuration
notes, complete the following table to make sure you have the required information
to complete the different steps.</span></p>
<section class="section">
<div class="note important note_important"><span class="note__title">IMPORTANT:</span> <span class="ph">If you are not familiar with the meaning of the fields and
buttons, click <span class="keyword wintitle">Show Help</span>, located at the upper right corner of
the Web page. When activated, the fields and buttons that offer online help will
change to green and if you hover over them, the description will bedisplayed.</span></div>
</section>
<section class="section">
<div class="note note note_note"><span class="note__title">Note:</span> <span class="ph">The Mediatrix unit must be reinitialised to its factory default settings to make sure the configuration can be successfully executed.</span></div>
</section>
<table class="table frame-all" id="reference_o3x_5cp_k5__table_kkj_cdp_k5"><caption></caption><colgroup><col style="width:33.33333333333333%"><col style="width:33.33333333333333%"><col style="width:33.33333333333333%"></colgroup><thead class="thead">
<tr class="row">
<th class="entry colsep-1 rowsep-1" id="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__1">Information</th>
<th class="entry colsep-1 rowsep-1" id="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__2">Value</th>
<th class="entry colsep-1 rowsep-1" id="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__3">Used in Step</th>
</tr>
</thead><tbody class="tbody">
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__1">IP address used by your Mediatrix unit to communicate with the Management
Interface.<ul class="ul" id="reference_o3x_5cp_k5__ul_xl2_hfp_k5">
<li class="li">If your computer is connected to the Ethernet port meant to be connected to the
Local Area Network (LAN), i.e. Eth2 on most devices.</li>
</ul></td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__2">Use this value 192.168.0.10</td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__3"><a class="xref" href="#task_ifw_qpc_zp">Logging on to the Mediatrix Unit Web Interface</a></td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__1">
<ul class="ul" id="reference_o3x_5cp_k5__ul_pfz_3fp_k5">
<li class="li"> If your Mediatrix unit is configured to use a DHCP server, use the DHCP server-
provided IP address. </li>
</ul>
</td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__2"> </td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__3"><a class="xref" href="#task_ifw_qpc_zp">Logging on to the Mediatrix Unit Web Interface</a></td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__1">
<ul class="ul" id="reference_o3x_5cp_k5__ul_d5k_rwf_x5">
<li class="li"> If your Mediatrix unit is configured to use the IPv6 Link Local.</li>
</ul>
</td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__2">Locate the IP Link Local label underneath your Mediatrix unit.</td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__3"><a class="xref" href="#task_ifw_qpc_zp">Logging on to the Mediatrix Unit Web Interface</a></td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__1">LAN IP address as defined in your network address range.</td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__2"></td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__3">
<a class="xref" href="#task_rrr_gxw_gq">Configuring the Lan1 Network Interface</a></td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__1">Wan IP address as defined in your network address range.</td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__2"></td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__3"><a class="xref" href="#task_qdd_jmd_s5">Configuring the Uplink Network Interface to a static IP address</a></td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__1">Static Default Router IP address of the Uplink Network Interface.</td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__2"></td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__3"><a class="xref" href="#task_k3r_gtq_55">Configuring the Default Network Gateway to a Static IP Address</a></td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__1">IP address of each DNS server.</td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__2"></td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__3"><a class="xref" href="#task_g1k_xml_j5">Configuring the Domain Name Server (DNS)</a></td>
</tr>
<tr class="row">
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__1">IP address of each SNTP server.</td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__2"></td>
<td class="entry colsep-1 rowsep-1" headers="reference_o3x_5cp_k5__table_kkj_cdp_k5__entry__3"><a class="xref" href="#task_ofy_g2q_5q">Configuring the SNTP Server to a Static IP Address</a></td>
</tr>
</tbody></table>
</div>
</article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic concept nested0" aria-labelledby="ariaid-title2" id="concept_dt4_p3s_jq">
<h1 class="title topictitle1" id="ariaid-title2">Default Network Interfaces</h1>
<div class="body conbody"><p class="shortdesc">There are four Network Interfaces created by default on the Mediatrix unit: Uplink, Lan
1, UplinkV6, and Rescue.</p>
<div class="p">
<ul class="ul" id="concept_dt4_p3s_jq__ul_jz3_35g_mr">
<li class="li">The <span class="keyword wintitle">Uplink</span> network interface
defines the uplink information required by the Mediatrix unit to properly connect to the
WAN. (By default eth1 for all platforms, except for the 4102S which is WAN . By default,
this interface uses the <span class="keyword wintitle">IpDhcp (IPv4 DHCP)</span>
connection type. If you are using only one Network Interface, you must use <span class="keyword wintitle">Uplink</span>.</li>
<li class="li">The <span class="keyword wintitle">Lan1</span> network interface
defines the information required by the Mediatrix unit to properly connect to the LAN.(By
default eth2-5 for all platforms, except for the 4102 which is LAN) By default, the
<span class="keyword wintitle">Lan1</span> Network Interface uses
the <span class="keyword wintitle">IpStatic (IPv4 Static)</span> connection type.
The <span class="keyword wintitle">Lan1</span> network interface can
only be added on units with 2 network ports. </li>
<li class="li"> The <span class="keyword wintitle">Rescue</span> network interface,
is used to display the <span class="keyword wintitle">Rescue</span>
Management Interface when a partial reset of the unit is performed. By default, the
<span class="keyword wintitle">Rescue</span> network interface <ul class="ul" id="concept_dt4_p3s_jq__ul_xxc_g2q_mcb">
<li class="li">is disabled and automatically enabled when a partial reset is performed.</li>
<li class="li">uses the <span class="keyword wintitle">IpStatic (IPv4 Static)</span> or the
<span class="keyword wintitle">Ip6Static (IPv6 Static)</span> addresses.</li>
</ul>The <span class="keyword wintitle">Rescue</span> Network
Interface cannot be deleted. Refer to the <a class="xref" href="https://documentation.media5corp.com/display/DGWLATEST/Performing+a+Partial+Reset" target="_blank">Technical Bulletin - Performing a Partial Reset</a>
document published on the <a class="xref" href="https://documentation.media5corp.com/" target="_blank">Media5 Documentation Portal</a>.</li>
<li class="li">The <span class="keyword wintitle">UplinkV6 </span> network interface
defines the IPv6 uplink information required by the Mediatrix unit to properly connect to
the WAN. By default, this interface uses the <span class="keyword wintitle">IP6autoConf (IPv6 Auto-Conf)</span> configuration
mode.</li>
</ul>It is possible to create up to 48 Network Interfaces. </div>
</div>
</article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic nested0 nobody" aria-labelledby="ariaid-title3" id="topic_title_Configuring_the_Mediatrix_Unit_d1e17">
<h1 class="title topictitle1" id="ariaid-title3">Configuring the Mediatrix Unit</h1>
<article class="topic task nested1" aria-labelledby="ariaid-title4" lang="en-US" id="task_ifw_qpc_zp">
<h2 class="title topictitle2" id="ariaid-title4">Logging on to the Mediatrix Unit Web Interface</h2>
<div class="body taskbody">
<section class="section prereq"><div class="tasklabel"><strong class="sectiontitle tasklabel">Before you begin</strong></div>The computer IP address must be in the same TCP/IP network as the Mediatrix
unit.</section>
<section class="section context"><div class="tasklabel"><strong class="sectiontitle tasklabel">About this task</strong></div>For better performances, it is recommended to use the latest available version of
Microsoft Internet Explorer, Google Chrome, or Mozilla Firefox. <div class="note note note_note"><span class="note__title">Note:</span> You may not be
able to log on to the Mediatrix unit Web interface if you are using older browser
versions. </div></section>
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Procedure</strong></div><ol class="ol steps"><li class="li step stepexpand">
<span class="ph cmd">In your Web browser, enter the IP address at which the Web interface of your
Mediatrix unit can be reached.</span>
<ul class="ul choices" id="task_ifw_qpc_zp__choices_kx1_wf3_bq">
<li class="li choice">If your network has an IPv4 DHCP server, connect the primary Ethernet
port of the Mediatrix unit to the network (ETH1 port), use the provided DHCP
server IP address.</li>
<li class="li choice">You can also connect your computer to the secondary Ethernet port of the
Mediatrix unit (ETH2), use the 192.168.0.10 IP address. However, the
computer must also own an IP address in the 192.168.0.0/24 network.</li>
</ul>
</li><li class="li step stepexpand">
<span class="ph cmd">Enter <span class="keyword wintitle">admin</span> as your
username and <span class="keyword wintitle">administrator</span> as the
password.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> You can also use <span class="keyword wintitle">public</span> as a username and
leave the password field empty; it has the full administration rights by
default. </div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="ph uicontrol">Login</span>.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Results</strong></div>The <span class="ph uicontrol">Information</span> page of
the Web interface is displayed.</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks" lang="en-US"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Related tasks</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_rrr_gxw_gq">Configuring the Lan1 Network Interface</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title5" id="task_rrr_gxw_gq">
<h2 class="title topictitle2" id="ariaid-title5">Configuring the <span class="keyword wintitle">Lan1</span> Network
Interface</h2>
<div class="body taskbody">
<section id="task_rrr_gxw_gq__steps_hqr_vrr_2q"><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps" id="task_rrr_gxw_gq__steps_hqr_vrr_2q"><li class="li step stepexpand">
<span class="ph cmd">Go to <span class="keyword wintitle">Network</span>/<span class="keyword wintitle">Interfaces</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">From the <span class="keyword wintitle">Link</span> list
located next to <span class="keyword wintitle">Lan1</span>,
leave the default value.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Static IP Address</span> field, enter the LAN static IP address as defined in your network address
range.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span> to apply
all changes to the configuration.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> A Warning message is displayed, but this is normal.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span>.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> Once the changes are applied, the connection with the unit might be lost.
You may need to reconnect to the web page using the new address.</div>
</div>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>The <span class="keyword wintitle">Lan1</span> Network Interface
will be available in all the lists of the Management Interface where a Network Interface
needs to be selected. For example, in the Local Firewall, and Configuration pages.
<br><img class="image" id="task_rrr_gxw_gq__image_e4f_fbb_mcb" src="https://documentation.media5corp.com/download/attachments/45481987/NetworkInterfaceConfiguration_Edge.png" width="800"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_qdd_jmd_s5">Configuring the Uplink Network Interface to a static IP address</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title6" id="task_qdd_jmd_s5">
<h2 class="title topictitle2" id="ariaid-title6">Configuring the <span class="keyword wintitle">Uplink</span> Network
Interface to a static IP address</h2>
<div class="body taskbody">
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step stepexpand">
<span class="ph cmd">Go to <span class="keyword wintitle">Network</span>/<span class="keyword wintitle">Interfaces</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Network Interface Configuration</span> table, from the <span class="keyword wintitle">Link</span> selection list located next to <span class="keyword wintitle">Uplink</span>, leave the default
value, i.e. ETH1.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">From the <span class="keyword wintitle">Type</span>
selection list, select <span class="keyword wintitle">IpStatic (IPv4 Static)</span>.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> The <span class="keyword wintitle">Uplink</span>
Network Interface must be set with a fixed public IP address for the
NAT/router to be able to do port-forwarding to the unit. It will also be
easier for the PBX to communicate with the unit if the address is
static.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Static IP Address</span> field enter the assigned static IP address.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">From the <span class="keyword wintitle">Activation</span>
selection list, select <span class="keyword wintitle">Enable</span>. </span>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span> to apply
all changes to the configuration.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> Once the changes are applied, the connection with the unit might be lost.
You may need to reconnect to the Web page using the new address.</div>
</div>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>The unit can be reached (via the Web) through the Uplink static IP address<br><img class="image" id="task_qdd_jmd_s5__image_wfn_sz4_ccb" src="https://documentation.media5corp.com/download/attachments/45481987/NetworkConfigurationStaticUplink3cxFXO.PNG" width="800"><br></section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_k3r_gtq_55">Configuring the Default Network Gateway to a Static IP Address</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title7" id="task_k3r_gtq_55">
<h2 class="title topictitle2" id="ariaid-title7">Configuring the Default Network Gateway to a Static IP Address</h2>
<div class="body taskbody">
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step">
<span class="ph cmd">Go to <span class="keyword wintitle">Network</span>/<span class="keyword wintitle">Host</span>.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">Default Gateway
Configuration</span>
table, from the <span class="keyword wintitle">IPv4</span>/<span class="keyword wintitle">Configuration Source</span>
selection list, select <span class="keyword wintitle">Static</span>.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">IPv4</span>/<span class="keyword wintitle">Default Gateway</span> field, enter
the IP address used as the <span class="keyword wintitle">Static Default Router</span> for the
Uplink Network Interface.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">Default Gateway
Configuration</span>
table, from the <span class="keyword wintitle">IPv6</span>/<span class="keyword wintitle">Configuration Source</span>
selection list, select <span class="keyword wintitle">Static</span>.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">IPv6</span>/<span class="keyword wintitle">Default Gateway</span> field, enter
the IP address used as the <span class="keyword wintitle">Static Default Router</span> for the
Uplink Network Interface.</span>
</li><li class="li step">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span>.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>The specified address is used as the current default router address.<br><img class="image" id="task_k3r_gtq_55__image_zmg_kvz_3fb" src="https://documentation.media5corp.com/download/attachments/45481987/DefaultGatewayConfiguration_Static.png" width="800"><br></section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_xwx_vhb_tx">Configuring the Syslog Server</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title8" id="task_xwx_vhb_tx">
<h2 class="title topictitle2" id="ariaid-title8">Configuring the Syslog Server</h2>
<div class="body taskbody">
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step stepexpand">
<span class="ph cmd">Go to <span class="keyword wintitle">System</span>/<span class="keyword wintitle">Event Log</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Syslog Configuration</span> table,
in the <span class="keyword wintitle">Remote Host</span>
field, enter the IP address of the syslog server.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> If you are gathering packets using Wireshark, you can also use the IP of
the PC that takes the Wireshark capture.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span>.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="task_xwx_vhb_tx__image_pg4_ln1_2hb" src="https://documentation.media5corp.com/download/attachments/45481987/syslogConfiguration.png" width="800"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_g1k_xml_j5">Configuring the Domain Name Server (DNS)</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title9" id="task_g1k_xml_j5">
<h2 class="title topictitle2" id="ariaid-title9">Configuring the Domain Name Server (DNS)</h2>
<div class="body taskbody">
<section class="section prereq"><div class="tasklabel"><strong class="sectiontitle tasklabel">Before you begin</strong></div>Although it is possible to use public DNS servers you should always ask your
internet service provider to provide at least the primary and secondary DNS
servers.</section>
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step">
<span class="ph cmd">Go to <span class="keyword wintitle">Network</span>/<span class="keyword wintitle">Host</span>.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">DNS Configuration</span> table, form the <span class="keyword wintitle">Configuration Source</span>
selection list, select <span class="keyword wintitle">Static</span>.</span>
</li><li class="li step">
<span class="ph cmd">For each DNS used, enter the IP address of the DNS. </span>
</li><li class="li step">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span>.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="task_g1k_xml_j5__image_zl2_fmq_55" src="https://documentation.media5corp.com/download/attachments/45481987/DNSConfigurationStatic.PNG" width="800"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_ofy_g2q_5q">Configuring the SNTP Server to a Static IP Address</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title10" id="task_ofy_g2q_5q">
<h2 class="title topictitle2" id="ariaid-title10">Configuring the SNTP Server to a Static IP Address</h2>
<div class="body taskbody">
<section class="section prereq"><div class="tasklabel"><strong class="sectiontitle tasklabel">Before you begin</strong></div>Make sure there is an SNTP server available.</section>
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step stepexpand">
<span class="ph cmd">Go to <span class="keyword wintitle">Network</span>/<span class="keyword wintitle">Host</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">SNTP Configuration</span> table,
from the <span class="keyword wintitle">Configuration Source</span>
selection list, select <span class="keyword wintitle">Static</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Provide an IP address or domain name and port numbers for each SNTP server you
are using.</span>
<div class="itemgroup info">
<div class="p">
<div class="note note note_note"><span class="note__title">Note:</span> The best practice is to use the servers supplied by your Internet
Service Provider, then complement with servers from a different network
close to your geographical area. For example: <a class="xref" href="http://time.nist.gov" target="_blank">time.nist.gov</a> (USA), <a class="xref" href="http://ntp4.sptime.se" target="_blank">ntp4.sptime.se</a> (Sweden), <a class="xref" href="http://time1.isu.net.sa" target="_blank">time1.isu.net.sa</a> (Saudi Arabia), <a class="xref" href="http://ntp.nict.jp" target="_blank">ntp.nict.jp</a> (Japan), <a class="xref" href="http://time.google.com" target="_blank">time.google.com</a> (Worldwide),
<a class="xref" href="http://pool.ntp.org" target="_blank">pool.ntp.org</a> or one of their regional server pools (see
<a class="xref" href="https://www.ntppool.org/" target="_blank">https://www.ntppool.org/</a> for more information).</div>
</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">If necessary, change the value of the <span class="keyword wintitle">Synchronisation Period</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">If necessary, change the value of the <span class="keyword wintitle">Synchronisation Period on Error</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span>.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>The SNTP host name and port will be displayed in the <span class="keyword wintitle">Host Status</span> table under <span class="keyword wintitle">Network</span>/<span class="keyword wintitle">Status</span>. <br><img class="image" id="task_ofy_g2q_5q__image_dz5_rmq_55" src="https://documentation.media5corp.com/download/attachments/45481987/SNTPConfigurationStatic.png" width="800"><br></section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_ol3_sv3_5s">Auto-Detecting and Auto-Configuring ISDN Interfaces</a></li></ul></div></nav></article></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic nested0 nobody" aria-labelledby="ariaid-title11" id="topic_title_ISDN_Configuration_d1e25">
<h1 class="title topictitle1" id="ariaid-title11">ISDN Configuration</h1>
<article class="topic task nested1" aria-labelledby="ariaid-title12" id="task_ol3_sv3_5s">
<h2 class="title topictitle2" id="ariaid-title12">Auto-Detecting and Auto-Configuring ISDN Interfaces</h2>
<div class="body taskbody">
<section class="section context"><div class="tasklabel"><strong class="sectiontitle tasklabel">Context</strong></div><div class="note note note_note"><span class="note__title">Note:</span> Some parameters cannot be auto configured. For example, the clock mode is
configured according to the endpoint type, master for NT and slave for TE.</div></section>
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step stepexpand">
<span class="ph cmd">Go to <span class="keyword wintitle">ISDN</span>/<span class="keyword wintitle">Status</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Automatic Configuration</span>
table, from the selection list, choose the interface you wish to auto configure
or select all interfaces.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Start Sensing</span>.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> Launching the Automatic Configuration may terminate abruptly all ongoing
ISDN calls. The auto-configuration may take some time to complete and some
of the current ISDN configuration settings might be replaced by new
values.</div>
</div>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div> Under <span class="keyword wintitle">ISDN</span>/<span class="keyword wintitle">Status</span>, the <span class="keyword wintitle">Physical Link</span> and <span class="keyword wintitle">Signaling</span> fields of each interface
should indicate <span class="keyword wintitle">Up</span>.<br><img class="image" id="task_ol3_sv3_5s__image_zl5_jq2_b2b" src="https://documentation.media5corp.com/download/attachments/45481987/AutomaticConfiguration.png" width="800"><br><br><img class="image" id="task_ol3_sv3_5s__image_bsz_yfk_qmb" src="https://documentation.media5corp.com/download/attachments/45481987/StatusBRIup.png" width="800"><br></section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_pyd_xq4_ps">Configuring the E1T1 Interface (PRI)</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title13" id="task_pyd_xq4_ps">
<h2 class="title topictitle2" id="ariaid-title13">Configuring the E1T1 Interface (PRI)</h2>
<div class="body taskbody">
<section class="section prereq"><div class="tasklabel"><strong class="sectiontitle tasklabel">Before you begin</strong></div>Always use <a class="xref" href="#task_ol3_sv3_5s">Auto-Detecting and Auto-Configuring ISDN Interfaces</a>
procedure first to automatically detect and to automatically configure your PRI
interface. The manual configuration of the PRI interface should be used for fine tuning
of the configuration. </section>
<section class="section context"><div class="tasklabel"><strong class="sectiontitle tasklabel">Context</strong></div>It is important to take into consideration the following information: <ul class="ul" id="task_pyd_xq4_ps__ul_urm_2sp_j1b">
<li class="li"><span class="keyword wintitle">Fallback Encoding Scheme</span>: Only valid when receiving a SETUP message. The user sending the SETUP
message does not indicate alternative bearer capability</li>
<li class="li"><span class="keyword wintitle">Channel Range</span>:
Channels outside of the range defined for this field are ignored. Channels
reserved in both the <span class="keyword wintitle">Channels Reserved for Incoming
Calls</span> and <span class="keyword wintitle">Channels Reserved for Outgoing
Calls</span> fields are considered usable for both incoming and outgoing calls. The space
character is ignored and duplication is not allowed. Channels must be specified
in low to high order.</li>
<li class="li"><span class="keyword wintitle">Endpoint Type</span>: To use a specific interface as the reference clock, the parameter
must be set to <span class="keyword wintitle">TE</span>.</li>
<li class="li"><span class="keyword wintitle">Interface Configuration</span>: Call properties set in the Call Router have precedence over
the default values of the table. For more details on the Call Router, refer to
the <a class="xref" href="https://documentation.media5corp.com/display/DGWLATEST/Call+Router" target="_blank">DGW Configuration Guide - Call Router user
guide</a> published on the <a class="xref" href="https://documentation.media5corp.com/" target="_blank">Media5 Documentation Portal</a>.</li>
<li class="li"><span class="keyword wintitle">Signaling Protocol</span>:
Refer to the <a class="xref" href="Source/Isdn/r_SupportedSignallingProtocols.html#reference_rf1_yzy_p1b">Supported Signaling Protocols</a> section.</li>
</ul></section>
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step stepexpand">
<span class="ph cmd">Go to <span class="keyword wintitle">ISDN</span>/<span class="keyword wintitle">Primary Rate Interface</span>.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> ISDN ports can be configured while they are active. However they are
internally disabled to modify the configuration and then re-enabled. All
active calls on the port are dropped during this process. Configuration
changes should only be performed during planned down times. Most of the ISDN
parameters change require a restart of the ISDN service to be
applied.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">From the <span class="keyword wintitle">Select Interface</span> drop box,
select the E1/T1 interface you wish to modify.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> Depending on the Mediatrix model, there may be several interfaces.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Interface Configuration</span>
table, set the <span class="keyword wintitle">Endpoint Type</span> to <span class="keyword wintitle">TE</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Modify the parameters as indicated in the Results section.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Repeat the tasks <strong class="ph b">2</strong> to <strong class="ph b">5</strong> for each interfaces.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_q2l_pdh_tx">Configuring Interoperability</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title14" id="task_q2l_pdh_tx">
<h2 class="title topictitle2" id="ariaid-title14">Configuring Interoperability </h2>
<div class="body taskbody">
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step stepexpand">
<span class="ph cmd">Go to <span class="keyword wintitle">ISDN</span>/<span class="keyword wintitle">Interop</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">From the <span class="keyword wintitle">Select Interface</span> selection
list, choose<span class="keyword wintitle"> an interface</span>
.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Interop Configuration</span> table,
select <span class="keyword wintitle">Enable</span> for all
fields.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Apply To The Following
Endpoints</span>
table, select the interfaces you wish to apply the interoperability
configuration. </span>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span>.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> When facing issues in call establishment, disable the parameters one by
one.</div>
</div>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="task_q2l_pdh_tx__image_o3s_bhh_tx" src="https://documentation.media5corp.com/download/attachments/45481987/InteropConfiguration_BRI.png" width="800"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_fs2_hlw_j1b">Setting ISDN Automatic Call Cancellation Timers</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title15" id="task_fs2_hlw_j1b">
<h2 class="title topictitle2" id="ariaid-title15">Setting ISDN Automatic Call Cancellation Timers </h2>
<div class="body taskbody">
<section id="task_fs2_hlw_j1b__steps_cg1_llw_j1b"><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps" id="task_fs2_hlw_j1b__steps_cg1_llw_j1b"><li class="li step">
<span class="ph cmd">Go to <span class="keyword wintitle">ISDN</span>/<span class="keyword wintitle">Timer</span>.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">Time Configuration</span> table, set
the <span class="keyword wintitle">Auto Cancel Timeout</span>
parameter. </span>
</li><li class="li step">
<span class="ph cmd">Set the <span class="keyword wintitle">L1 Timer T3</span>.</span>
</li><li class="li step">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span>. </span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_r1h_rhv_sfb">Setting the Mediatrix Unit to Use the R2 Signaling Protocol</a></li></ul></div></nav></article></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic nested0 nobody" aria-labelledby="ariaid-title16" id="topic_title_R2_Configuration_d1e30">
<h1 class="title topictitle1" id="ariaid-title16">R2 Configuration</h1>
<article class="topic concept nested1" aria-labelledby="ariaid-title17" id="concept_wjt_ghv_sfb">
<h2 class="title topictitle2" id="ariaid-title17">Important information about R2-ISDN Collect Call Blockage (CCB)</h2>
<div class="body conbody">
<p class="p">When the collect call information for inbound calls (SIP --> ISDN / SIP --> R2) is relayed,
the Telefonica IMS (PSTN) sends the <span class="keyword wintitle">P-Asserted-Service-Info: service-code=Collect
Call</span> header in the SIP INVITE: </p>
<p class="p">When relaying collect call information to ISDN, the <span class="keyword parmname">IE: Reverse Charging Indication
(len = 3)</span> Information Element in the call setup is included. A call received with
the SIP header <span class="keyword parmname">P-Asserted-Service-Info: service-code=Collect Call </span> is
tagged as "Collect Call" in the call router.</p>
<p class="p">The Interop parameter to ignore the header, relay to the telephony lines or block right away
the call is: <span class="keyword parmname">SipEp.InteropCollectCallProprietaryHeader</span></p>
<ul class="ul" id="concept_wjt_ghv_sfb__ul_r2w_3hv_sfb_5">
<li class="li">Ignore: (default)</li>
<li class="li">Relay </li>
<li class="li">Block: (reject the call with a 603 Decline) </li>
</ul>
<div class="note note note_note"><span class="note__title">Note:</span> This parameter is only available using the CLI. </div>
</div>
</article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title18" id="task_r1h_rhv_sfb">
<h2 class="title topictitle2" id="ariaid-title18">Setting the Mediatrix Unit to Use the R2 Signaling Protocol</h2>
<div class="body taskbody">
<section class="section prereq"><div class="tasklabel"><strong class="sectiontitle tasklabel">Before you begin</strong></div>R2 signaling protocol can only be used on E1 line type.</section>
<section id="task_r1h_rhv_sfb__steps_zfl_23v_sfb"><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps" id="task_r1h_rhv_sfb__steps_zfl_23v_sfb"><li class="li step stepexpand">
<span class="ph cmd">Go to <span class="keyword wintitle">System</span>/<span class="keyword wintitle">Hardware</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">PRI Cards Configuration</span> table,
from the <span class="keyword wintitle">Signaling</span>
selection list, located on the same line as the port you wish to dedicate to R2
signaling, choose <span class="keyword wintitle">R2</span>. </span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> When changing from R2 to ISDN or ISDN to R2, you must change your routes
accordingly (Call Router/Route Config).</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">From the <span class="keyword wintitle">Line Type</span>
selection list, make sure <span class="keyword wintitle">E1</span> is selected. </span>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Restart the unit.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="task_r1h_rhv_sfb__image_bsr_44f_5fb" src="https://documentation.media5corp.com/download/attachments/45481987/PriCardsConfiguration_R2.png" width="800"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_dsp_scw_sfb">Configuring R2 CAS Parameters</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title19" id="task_dsp_scw_sfb">
<h2 class="title topictitle2" id="ariaid-title19">Configuring R2 CAS Parameters</h2>
<div class="body taskbody">
<section id="task_dsp_scw_sfb__steps_zkv_5cw_sfb"><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps" id="task_dsp_scw_sfb__steps_zkv_5cw_sfb"><li class="li step stepexpand">
<span class="ph cmd">Go to <span class="keyword wintitle">R2</span>/<span class="keyword wintitle">R2 Config</span>.</span>
</li><li class="li step stepexpand">
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> The number of available interfaces depends on the Mediatrix unit
model.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Interface Configuration</span>
configure the fields as required. </span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="task_dsp_scw_sfb__image_hwm_12w_sfb" src="https://documentation.media5corp.com/download/attachments/45481987/InterfaceConfiguration.png" width="800"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_aw2_fgw_sfb">Overriding Country Default R2 Signaling Variants</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title20" id="task_aw2_fgw_sfb">
<h2 class="title topictitle2" id="ariaid-title20">Overriding Country Default R2 Signaling Variants </h2>
<div class="body taskbody">
<section id="task_aw2_fgw_sfb__steps_wmt_3gw_sfb"><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps" id="task_aw2_fgw_sfb__steps_wmt_3gw_sfb"><li class="li step stepexpand">
<span class="ph cmd">Go to <span class="keyword wintitle">R2</span>/<span class="keyword wintitle">Signaling</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">From the <span class="keyword wintitle">Select Interface</span> selection
list, choose <span class="ph">an interface</span>.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> The number of available interfaces depends on the Mediatrix unit
model.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Country</span> table,
from the <span class="keyword wintitle">Override Default Country Settings</span> selection list, choose <span class="keyword wintitle">Enable</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Reset to Default</span>
to update the values with the selected country.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> Once the <span class="keyword wintitle">Override Default Country Settings</span> is enabled, the indicated values in the table are not from the specified
country in the <span class="keyword wintitle">Country Selection</span> field.
To get the appropriate values of the selected country, you must reset the
table values first.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">When prompted to, restart required services.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">R2 Signaling Variants</span>,
complete the fields as required. </span>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Again, when prompted to, restart required services.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="task_aw2_fgw_sfb__image_czc_k3w_sfb" src="https://documentation.media5corp.com/download/attachments/45481987/R2SignalingVariants.png" width="800"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#unique_1389866085543523704">Overriding Country Default R2 Timers Variants</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title21" id="unique_1389866085543523704">
<h2 class="title topictitle2" id="ariaid-title21">Overriding Country Default R2 Timers Variants </h2>
<div class="body taskbody">
<section class="section prereq"><div class="tasklabel"><strong class="sectiontitle tasklabel">Before you begin</strong></div>Modifying the default values of the Timers Variants should be performed by qualified
technicians unless you are an expert in R2 CAS protocol. </section>
<section id="unique_1389866085543523704__steps_wmt_3gw_sfb"><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps" id="unique_1389866085543523704__steps_wmt_3gw_sfb"><li class="li step stepexpand">
<span class="ph cmd">Go to <span class="keyword wintitle">R2</span>/<span class="keyword wintitle">Timers</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">From the <span class="keyword wintitle">Select Interface</span> selection
list, choose <span class="ph">an interface</span>.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> The number of available interfaces depends on the Mediatrix unit
model.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Country</span> table,
from the <span class="keyword wintitle">Override Default Country Settings</span> selection list, choose <span class="keyword wintitle">Enable</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Reset to Default</span>
to update the values with the selected country.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> Once the <span class="keyword wintitle">Override Default Country Settings</span> is enabled, the indicated values in the table are not from the specified
country in the <span class="keyword wintitle">Country Selection</span>. To get
the appropriate values of the selected country, you must reset the table
values first.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">When prompted to, restart required services.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">R2 Timers Variants</span>, complete the fields as required. </span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> Changing a timeout value could require to adjust other timeout values in
R2 Timers Variants and R2 Digit Timers Variants. Refer to the parameter
description for more details.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Again, when prompted to, restart required services.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="unique_1389866085543523704__image_snb_fjw_sfb" src="https://documentation.media5corp.com/download/attachments/45481987/R2TimersVariants.png" width="700"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#unique_20362213441995578344">Overriding Country Default Tone Variants</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title22" id="unique_20362213441995578344">
<h2 class="title topictitle2" id="ariaid-title22">Overriding Country Default Tone Variants </h2>
<div class="body taskbody">
<section id="unique_20362213441995578344__steps_wmt_3gw_sfb"><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps" id="unique_20362213441995578344__steps_wmt_3gw_sfb"><li class="li step stepexpand">
<span class="ph cmd">Go to <span class="keyword wintitle">R2</span>/<span class="keyword wintitle">Tones</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">From the <span class="keyword wintitle">Select Interface</span> selection
list, choose <span class="ph">an interface</span>.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> The number of available interfaces depends on the Mediatrix unit
model.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Country</span> table,
from the <span class="keyword wintitle">Override Default Country Settings</span> selection list, choose <span class="keyword wintitle">Enable</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Reset to Default</span>
to update the values with the selected country.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> Once the <span class="keyword wintitle">Override Default Country Settings</span> is enabled, the indicated values in the table are not from the specified
country in the <span class="keyword wintitle">Country Selection</span>. To get
the appropriate values of the selected country, you must reset the table
values first.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">When prompted to, restart required services.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">R2 Tones Backward Groups</span> and
<span class="keyword wintitle">R2 Tones Forward Groups</span>, complete the fields as required. </span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> For more details on Forward tones/groups and Backward tones/groups, refer
to the <a class="xref" href="Source/R2/c_InterregisterSignals.html#concept_wjt_ghv_sfb" title="The interregister, or interswitch, signals in MFC/R2 signaling (defined in ITU-T Q.441 ) are encoded as the presence of 2, and only 2, out of 6 specific tones, spaced at 120 Hz intervals.">Interregister Signals</a>
section.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Again, when prompted to, restart required services.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="unique_20362213441995578344__image_hrf_xqf_5fb" src="https://documentation.media5corp.com/download/attachments/45481987/Tones.png" width="800"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_dv5_zzl_4s">Configuring the SIP Proxy Server</a></li></ul></div></nav></article></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic nested0 nobody" aria-labelledby="ariaid-title23" id="topic_title_SIP_Configuration_d1e37">
<h1 class="title topictitle1" id="ariaid-title23">SIP Configuration</h1>
<article class="topic task nested1" aria-labelledby="ariaid-title24" id="task_dv5_zzl_4s">
<h2 class="title topictitle2" id="ariaid-title24">Configuring the SIP Proxy Server</h2>
<div class="body taskbody">
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step stepexpand">
<span class="ph cmd">Go to <span class="keyword wintitle">SIP</span>/<span class="keyword wintitle">Servers</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Default Servers</span>
table, set the <span class="keyword wintitle">Proxy Host</span> field to the IP address of the Proxy server followed with
its SIP port number.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> For example, 192.168.0.5:5060</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd"> Click <span class="ph uicontrol">restart required services</span>,
located at the top of the page.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="task_dv5_zzl_4s__image_dqw_jdm_4s" src="https://documentation.media5corp.com/download/attachments/45481987/DefaultServers_MediationServer.png" width="800"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_pf2_fbc_bq">Setting SIP Interoperability Parameters</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title25" id="task_pf2_fbc_bq">
<h2 class="title topictitle2" id="ariaid-title25">Setting SIP Interoperability Parameters</h2>
<div class="body taskbody">
<section class="section context"><div class="tasklabel"><strong class="sectiontitle tasklabel">Context</strong></div></section>
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step stepexpand">
<span class="ph cmd">Go <span class="keyword wintitle">SIP</span>/<span class="keyword wintitle">Interop</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Complete the fields of the <span class="keyword wintitle">SIP Interop</span> table as
required. </span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> no direction attribute is present in the SDP if the
<span class="keyword parmname">InteropSdpDirectionAttributeEnable</span> parameter is set
to disable.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span>.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_s1h_jzf_4s">Enabling Default Codecs</a></li></ul></div></nav></article></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic nested0 nobody" aria-labelledby="ariaid-title26" id="topic_title_Media_Configuration_d1e40">
<h1 class="title topictitle1" id="ariaid-title26">Media Configuration</h1>
<article class="topic task nested1" aria-labelledby="ariaid-title27" id="task_s1h_jzf_4s">
<h2 class="title topictitle2" id="ariaid-title27">Enabling Default Codecs</h2>
<div class="body taskbody">
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step stepexpand">
<span class="ph cmd">Go to <span class="keyword wintitle">Media</span>/<span class="keyword wintitle">Codecs</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">From the <span class="keyword wintitle">Select Codec Bank</span>, choose if
you want the G.722 , the G.723.1, G.726 or G.729 codec.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> All Codec Banks include the T.38, the Clear Mode, the Clear Channel, and
the X-CCD codecs.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Codec</span> table,
select the desired codecs and <span class="keyword wintitle">Enable</span> / <span class="keyword wintitle">Disable</span> them.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> Codecs that appear in Red are not part of the selected codec Bank, thus
they can be disabled without a problem.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <img class="image" id="task_s1h_jzf_4s__image_zxv_f4d_rbb" src="https://documentation.media5corp.com/download/attachments/45481987/pencilbleu.jpg" width="15"> for Advanced codec settings.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> When enabling two codecs or more, the priority order can be modified by
selecting the advanced options.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span>.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="task_s1h_jzf_4s__image_yf2_k1g_4s" src="https://documentation.media5corp.com/download/attachments/45481987/Codec_MediatrixGatewayLync2010.png" width="600"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#t_configurebearercapabilities">Configuring Codec Advanced Parameters</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title28" id="t_configurebearercapabilities">
<h2 class="title topictitle2" id="ariaid-title28">Configuring Codec Advanced Parameters</h2>
<div class="body taskbody">
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step stepexpand">
<span class="ph cmd">Go to <span class="keyword wintitle">Media</span>/<span class="keyword wintitle">Codecs</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">From the <span class="keyword wintitle">Select Codec Bank</span>, choose the
G.723.1, G.726 or G.729 codec bank.</span>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> All Codec Banks include the T.38, the Clear Mode, the Clear Channel, and
the X-CCD codecs.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Codec</span> table,
click <img class="image" id="t_configurebearercapabilities__image_zxv_f4d_rbb" src="https://documentation.media5corp.com/download/attachments/45481987/pencilbleu.jpg" width="15"> next to the codec you wish to configure.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">From the <span class="keyword wintitle">Select Endpoint</span> drop-down list, select <span class="keyword wintitle">Default</span> to apply changes to
all endpoints or select the specific <span class="keyword wintitle">Endpoint</span> to apply changes to
the selected endpoint.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Complete the fields as required. </span>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span>.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>This is an example for the G.711 Codec.<br><img class="image" id="t_configurebearercapabilities__image_nhg_tfq_sbb_2" src="https://documentation.media5corp.com/download/attachments/45481987/G711_customTelefBrasil.PNG" width="800"><br></section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_ks2_fqt_lt">Configuring Machine Detection</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title29" id="task_ks2_fqt_lt">
<h2 class="title topictitle2" id="ariaid-title29">Configuring Machine Detection</h2>
<div class="body taskbody">
<section class="section context"><div class="tasklabel"><strong class="sectiontitle tasklabel">Context</strong></div><div class="note note note_note"><span class="note__title">Note:</span> This
procedure is only required if your fax machine is directly connected to a specific
FXS port and if this port is not used for modem transmission.</div></section>
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step">
<span class="ph cmd">Go to <span class="keyword wintitle">Media</span>/<span class="keyword wintitle">Misc</span>. </span>
</li><li class="li step">
<span class="ph cmd">Set the <span class="keyword wintitle">CNG Tone Detection</span> selection
list to <span class="keyword wintitle">Enable</span>.</span>
</li><li class="li step">
<span class="ph cmd">Set the <span class="keyword wintitle">CED Tone Detection</span> selection
list to <span class="keyword wintitle">Enable</span>. </span>
</li><li class="li step">
<span class="ph cmd">Set the <span class="keyword wintitle">V.21 Modulation Detection</span>
selection list to <span class="keyword wintitle">Enable</span>.</span>
</li><li class="li step">
<span class="ph cmd">Set the <span class="keyword wintitle">Behavior On CED Tone
Detection</span>
selection list to <span class="keyword wintitle">Fax Mode</span>.</span>
</li><li class="li step">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span>. </span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="task_ks2_fqt_lt__image_ozz_gny_lt" src="https://documentation.media5corp.com/download/attachments/45481987/MachineDetection.png" width="600"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_wls_x1g_4s">Configuring DTMF Transport - Out of Band Using RTP</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title30" id="task_wls_x1g_4s">
<h2 class="title topictitle2" id="ariaid-title30">Configuring DTMF Transport - Out of Band Using RTP</h2>
<div class="body taskbody">
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step">
<span class="ph cmd">Go to <span class="keyword wintitle">Media</span>/<span class="keyword wintitle">Misc</span>.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">DTMF Transport</span>
table, set the <span class="keyword wintitle">Transport Method</span> to <span class="keyword wintitle">Out-of-Band using RTP</span>.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">Payload Type</span>
field, type <span class="keyword wintitle">100</span>.</span>
</li><li class="li step">
<span class="ph cmd">Click <span class="keyword wintitle">Apply</span>.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="task_wls_x1g_4s__image_h3j_mbg_4s_2" src="https://documentation.media5corp.com/download/attachments/45481987/DTMFTransport_OutofBandUsingRTP_customTelefBrasil.PNG" width="800"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_m1m_rv2_qs">Creating a Hunt Group - PRI</a></li></ul></div></nav></article></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic nested0 nobody" aria-labelledby="ariaid-title31" id="topic_title_Configuring_the_Call_Router_d1e45">
<h1 class="title topictitle1" id="ariaid-title31">Configuring the Call Router</h1>
<article class="topic task nested1" aria-labelledby="ariaid-title32" id="task_m1m_rv2_qs">
<h2 class="title topictitle2" id="ariaid-title32">Creating a Hunt Group - PRI</h2>
<div class="body taskbody">
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step">
<span class="ph cmd">Go to <span class="keyword wintitle">Call Router</span>/<span class="keyword wintitle">Route Config</span>.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">Hunt</span> table,
click <img class="image" id="task_m1m_rv2_qs__image_fkl_lx2_qs" src="https://documentation.media5corp.com/download/attachments/45481987/Plusbleu.jpg" width="16">.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">Configure New Hunt</span> table, set the following:</span>
<ol type="a" class="ol substeps" id="task_m1m_rv2_qs__substeps_pyf_2y2_qs">
<li class="li substep">
<span class="ph cmd">Set the <span class="keyword wintitle">Name</span>
field to <span class="keyword wintitle">PRI</span>.</span>
</li>
<li class="li substep">
<span class="ph cmd">Using the <span class="keyword wintitle">Destinations</span>'
dropbox, add all the PRI ports used in your configuration.</span>
</li>
<li class="li substep">
<span class="ph cmd">Leave the other fields with their default value.</span>
</li>
</ol>
</li><li class="li step">
<span class="ph cmd">Click <span class="keyword wintitle">Save</span>.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">Route Config</span>
window, click <span class="keyword wintitle">Save</span>
again.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="task_m1m_rv2_qs__image_ymd_vs4_qy" src="https://documentation.media5corp.com/download/attachments/45481987/CreateHunt-PRI-Asterisk.PNG" width="800"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_xrg_gj2_4s">Creating a New Route</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title33" id="task_xrg_gj2_4s">
<h2 class="title topictitle2" id="ariaid-title33">Creating a New Route</h2>
<div class="body taskbody">
<section class="section prereq"><div class="tasklabel"><strong class="sectiontitle tasklabel">Before you begin</strong></div>The task <a class="xref" href="#task_m1m_rv2_qs">Creating a Hunt Group - PRI</a> must
be completed. </section>
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step">
<span class="ph cmd">Go to <span class="keyword wintitle">Call Router</span>/<span class="keyword wintitle">Route Config</span>.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">Routes</span> table,
click <img class="image" id="task_xrg_gj2_4s__image_pss_fk2_4s" src="https://documentation.media5corp.com/download/attachments/45481987/Plusbleu.jpg" width="12">.</span>
</li><li class="li step">
<span class="ph cmd">From the dropbox next to the <span class="keyword wintitle">Sources</span> field, select
<span class="keyword wintitle">sip-default</span>.</span>
</li><li class="li step">
<span class="ph cmd">From the dropbox next to the <span class="keyword wintitle">Destination</span> field, select
hunt-PRI_Hunt.</span>
</li><li class="li step">
<span class="ph cmd">Click <span class="keyword wintitle">Save</span>.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">Routes</span> table,
click <img class="image" id="task_xrg_gj2_4s__image_jbw_lm2_4s" src="https://documentation.media5corp.com/download/attachments/45481987/Plusbleu.jpg" width="12">
.</span>
</li><li class="li step">
<span class="ph cmd">From the dropbox next to the <span class="keyword wintitle">Sources</span>, select all the used
PRI port.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">Destination</span>
field, set <span class="keyword wintitle">sip-default</span>.</span>
</li><li class="li step">
<span class="ph cmd">Click <span class="keyword wintitle">Save</span> to apply
the new configuration. </span>
</li><li class="li step">
<span class="ph cmd">In the <span class="keyword wintitle">Route Config</span>
window, click <span class="keyword wintitle">Save</span>
again.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>
<br><img class="image" id="task_xrg_gj2_4s__image_czw_ln2_4s" src="https://documentation.media5corp.com/download/attachments/45481987/Route_RemoteOffice.png" width="800"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_snj_mzt_qv">Creating a Call Property Transformation</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title34" id="task_snj_mzt_qv">
<h2 class="title topictitle2" id="ariaid-title34">Creating a Call Property Transformation </h2>
<div class="body taskbody">
<section id="task_snj_mzt_qv__steps_sly_4zt_qv"><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps" id="task_snj_mzt_qv__steps_sly_4zt_qv"><li class="li step stepexpand">
<span class="ph cmd">Go to <span class="keyword wintitle">Call Router</span>/<span class="keyword wintitle">Route Config</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Transformations</span>
table, click <img class="image" id="task_snj_mzt_qv__image_epg_rbt_qv" src="https://documentation.media5corp.com/download/attachments/45481987/Plusbleu.jpg" width="15">.</span>
<ul class="ul choices" id="task_snj_mzt_qv__choices_g1c_kwd_2s">
<li class="li choice">click <img class="image" id="task_snj_mzt_qv__image_skd_p4d_2s" height="15" src="https://documentation.media5corp.com/download/attachments/45481987/Plusbleu.jpg"> located on the same row as an existing call
property transformation to add a new call property transformation above
or,</li>
<li class="li choice">click <img class="image" id="task_snj_mzt_qv__image_m1b_fwd_2s" height="15" src="https://documentation.media5corp.com/download/attachments/45481987/Plusbleu.jpg"> located at the bottom of the table to add a call
property transformation at the end of the table. </li>
</ul>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> A maximum of 40 call property transformations can be created.</div>
</div>
</li><li class="li step stepexpand" id="task_snj_mzt_qv__Stepname">
<span class="ph cmd">In the <span class="keyword wintitle">Configure
Transformation</span>
table, in the <span class="keyword wintitle">Name</span>
field, enter a name for the call property transformation.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">From the selection list of the <span class="keyword wintitle">Criteria Based On</span> field,
select the call property that must be matched to apply the Transformation.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">From the selection list of the <span class="keyword wintitle">Transformation Applies To</span>
field, select the call property to transform.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Save and Insert Rule</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Configure Transformation
Rule</span>
table, from the <span class="keyword wintitle">Name</span>
selection list, select the name entered at step 3.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Criteria</span>
field, indicate the call property criteria to match to apply the
transformation.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Transformation</span>
field, select the transformation to apply to the call property.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Save</span> or
<span class="keyword wintitle">Save and Insert Rule</span> to
add another Transformation.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>The new Call Property Transformation is available to be used in a route.
<br><img class="image" id="task_snj_mzt_qv__image_ubk_jvp_yv" src="https://documentation.media5corp.com/download/attachments/45481987/MappingType_MappingExpression.png" width="850"><br>
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_nnz_byd_2s">Creating a Signaling Property</a></li></ul></div></nav></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic task nested1" aria-labelledby="ariaid-title35" id="task_nnz_byd_2s">
<h2 class="title topictitle2" id="ariaid-title35">Creating a Signaling Property</h2>
<div class="body taskbody">
<section id="task_nnz_byd_2s__steps_xl5_dyd_2s"><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps" id="task_nnz_byd_2s__steps_xl5_dyd_2s"><li class="li step stepexpand">
<span class="ph cmd">Go to <span class="keyword wintitle">Call Router</span>
/<span class="keyword wintitle">Route Config</span>.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Signaling Properties</span> table,
click <img class="image" id="task_nnz_byd_2s__image_dkd_ghg_c1b" src="https://documentation.media5corp.com/download/attachments/45481987/Plusbleu.jpg" width="15">.</span>
<ul class="ul choices" id="task_nnz_byd_2s__choices_g1c_kwd_2s">
<li class="li choice">click <img class="image" id="task_nnz_byd_2s__image_skd_p4d_2s" height="15" src="https://documentation.media5corp.com/download/attachments/45481987/Plusbleu.jpg"> located on the same row as an existing signaling
property to add a new signaling property above or,</li>
<li class="li choice">click <img class="image" id="task_nnz_byd_2s__image_m1b_fwd_2s" height="15" src="https://documentation.media5corp.com/download/attachments/45481987/Plusbleu.jpg"> located at the bottom of the table to add a
signaling property at the end of the table. </li>
</ul>
<div class="itemgroup info">
<div class="note note note_note"><span class="note__title">Note:</span> A maximum of 40 signaling properties can be created.</div>
</div>
</li><li class="li step stepexpand">
<span class="ph cmd">In the <span class="keyword wintitle">Configure Signaling
Property</span> table, modify the fields as required.</span>
</li><li class="li step stepexpand">
<span class="ph cmd">Click <span class="keyword wintitle">Save</span>.</span>
</li></ol></section>
<section class="section result"><div class="tasklabel"><strong class="sectiontitle tasklabel">Result</strong></div>The signaling property will be available to be used in a route.
</section>
</div>
<nav role="navigation" class="related-links"><div class="linklist relinfo reltasks"><div class="linklistlabel"><strong class="sectiontitle linklistlabel">Next Step</strong></div><ul class="linklist"><li class="linklist"><a class="link" href="#task_iks_t2q_ns">Restarting Services</a></li></ul></div></nav></article></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic nested0 nobody" aria-labelledby="ariaid-title36" id="topic_title_Restarting_Services_d1e50">
<h1 class="title topictitle1" id="ariaid-title36">Restarting Services</h1>
<article class="topic task nested1" aria-labelledby="ariaid-title37" id="task_iks_t2q_ns">
<h2 class="title topictitle2" id="ariaid-title37">Restarting Services</h2>
<div class="body taskbody">
<section><div class="tasklabel"><strong class="sectiontitle tasklabel">Steps</strong></div><ol class="ol steps"><li class="li step">
<span class="ph cmd">Go to <span class="keyword wintitle">System</span>/<span class="keyword wintitle">Services</span>.</span>
</li><li class="li step">
<span class="ph cmd">In the <span class="ph uicontrol">restart required services</span>
table, click <span class="ph uicontrol">restart required services</span>.</span>
</li></ol></section>
</div>
</article></article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic reference nested0" aria-labelledby="ariaid-title38" id="reference_j4g_nbv_gfb">
<h1 class="title topictitle1" id="ariaid-title38">Online Help</h1>
<p class="shortdesc"><span class="ph">If you are not familiar with the meaning of the fields and
buttons, click <span class="keyword wintitle">Show Help</span>, located at the upper right corner of
the Web page. When activated, the fields and buttons that offer online help will
change to green and if you hover over them, the description will bedisplayed.</span></p>
</article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic concept nested0" aria-labelledby="ariaid-title39" id="concept_v4k_q3h_1r">
<h1 class="title topictitle1" id="ariaid-title39">DGW Documentation</h1>
<div class="body conbody"><p class="shortdesc">Mediatrix devices are supplied with an exhaustive set of documentation. </p>
<p class="p">Mediatrix user documentation is available on the <a class="xref" href="http://documentation.media5corp.com" target="_blank">Media5 Documentation
Portal</a>.</p>
<div class="p">Several types of documents were created to clearly present the information you are looking for.
Our documentation includes:<ul class="ul" id="concept_v4k_q3h_1r__ul_bqy_cjh_1r">
<li class="li"><strong class="ph b">Release notes</strong>: Generated at each GA release, this document includes the known and
solved issues of the software. It also outlines the changes and the new features the release
includes.</li>
<li class="li"><strong class="ph b">Configuration notes</strong>: These documents are created to facilitate the configuration of a
specific use case. They address a configuration aspect we consider that most users will need to
perform. However, in some cases, a configuration note is created after receiving a question
from a customer. They provide standard step-by-step procedures detailing the values of the
parameters to use. They provide a means of validation and present some conceptual information.
The configuration notes are specifically created to guide the user through an aspect of the
configuration. </li>
<li class="li"><strong class="ph b">Technical bulletins</strong>: These documents are created to facilitate the configuration of a
specific technical action, such as performing a firmware upgrade.</li>
<li class="li"><strong class="ph b">Hardware installation guide</strong>: They provide the detailed procedure on how to safely and
adequately install the unit. It provides information on card installation, cable connections,
and how to access for the first time the Management interface.</li>
<li class="li"><strong class="ph b">User guide</strong>: The user guide explains how to customise to your needs the configuration
of the unit. Although this document is task oriented, it provides conceptual information to
help the user understand the purpose and impact of each task. The User Guide will provide
information such as where and how TR-069 can be configured in the Management Interface, how to
set firewalls, or how to use the CLI to configure parameters that are not available in the
Management Interface.</li>
<li class="li"><strong class="ph b">Reference guide</strong>: This exhaustive document has been created for advanced users. It
includes a description of all the parameters used by all the services of the Mediatrix units.
You will find, for example, scripts to configure a specific parameter, notification messages
sent by a service, or an action description used to create Rulesets. This document includes
reference information such as a dictionary, and it does not include any step-by-step
procedures. </li>
</ul></div>
</div>
</article><hr><span style="float: inline-end;"><a href="#">Top</a></span><article class="topic concept nested0" aria-labelledby="ariaid-title40" id="concept_fqm_rv4_k4">
<h1 class="title topictitle1" id="ariaid-title40">Copyright Notice</h1>
<div class="body conbody"><p class="shortdesc">Copyright © 2023 Media5 Corporation.</p>
<p class="p">This document contains information that is proprietary to Media5 Corporation.</p>
<p class="p">Media5 Corporation reserves all rights to this document as well as to the Intellectual Property
of the document and the technology and know-how that it includes and represents.</p>
<p class="p">This publication cannot be reproduced, neither in whole nor in part, in any form whatsoever,
without written prior approval by Media5 Corporation.</p>
<p class="p">Media5 Corporation reserves the right to revise this publication and make changes at any time
and without the obligation to notify any person and/or entity of such revisions and/or
changes.</p>
</div>
</article></article></main></body></html> |
