Available DGW Firmware Versions
1 Firmware Pack
The firmware pack is a ZIP file that contains the modules and the features to install on your Mediatrix unit when a new release is available.
When unzipping the firmware pack, the content is extracted according to a pre-defined tree architecture. This creates a directory that contains the files required for the Mediatrix unit to properly upgrade its firmware.
2 New Functionalities
| Incident # | CR # | Synopsis | Applies To |
|---|---|---|---|
| Description | |||
| DGW-3572 | Add new packet capture options for remote troubleshooting. | all | |
Packet capture functionality was added in the NLM service, allowing captured packets to be sent to a file in the File service or transferred in real time via a PUT to a HTTP server. This packet capture can be used from all configuration interfaces with the exception of TR-069. The packet capture uses the new following parameters and commands:
The packet capture can be configured via the Web interface, under the System/Packet Capture tab. | |||
| --- | DGW-3472 | Allows loading a MOH music file from the local file system. | all |
It is now possible to transfer a mp3 file for MOH using the file service. The mp3 file must be imported on the unit via the file service, with the "Path" or "Destination" set to "moh/". Then, in the "Music on Hold" configuration page, "file://filename.mp3" will be accepted has a valid URL. | |||
3 Modified Features, Functionalities and Interface Modifications
| Incident # | CR # | Synopsis | Applies To |
|---|---|---|---|
| Description | |||
| DGW-3981 | Syntax of the Nlm.SyslogRemoteHost parameter not validated. | Nlm | |
The syntax of Nlm.SyslogRemoteHost is now validated when a new value is set via Web page, the Cli, Snmp, or a configuration script. The upgrade and restore functionalities are not affected by this validation. | |||
| DGW-3572 | Add new packet capture options for remote troubleshooting. | all | |
The packet capture can be configured via the Web interface, under the System/Packet Capture tab. The packet capture uses the new following parameters and commands:
| |||
| --- | DGW-3472 | Allows loading a MOH music file from the local file system. | all |
It is now possible to transfer a mp3 file for MOH using the file service. | |||
4 Issues Fixed
| Incident # | CR # | Synopsis | Applies To |
|---|---|---|---|
| Description | |||
| DGW-6311 | Received Reinvites with the same CSeq used in the invite causes one way audio or call failures. | Sbc | |
If the Sbc receives a reinvite using the same CSeq as the one of the invite it sent, it no longer causes one way audio or call failures. | |||
| DGW-6238 | PCM captures are sent to UDP port numbers 5000+X and 6000+X, where X is the channel number | all | |
The PCM captures were sent to UDP port numbers 5000+X and 6000+X, where X was the channel number. Now they are always sent to ports 5001 and 6001. | |||
| DGW-6197 | Ciphers are not listed by Sbc in the proper order. | all | |
The order of the ciphers was no longer from most secure to less. This was corrected. | |||
| DGW-6196 | Cipher AES_256_CM_HMAC_SHA1_80 is ignored by the SBC. | SBC | |
When offered a AES_256_CM_HMAC_SHA1_80 in SRTP, the SBC no longer ignores it. | |||
IN-12876 | DGW-6135 | Link to Date/Time Criteria Editor not working. | all |
The link to the "Date/Time Criteria Editor" page available in the Transformation Rule editor Web page has been restored. | |||
| DGW-5391 | Mediatrix 3XXX series units sometimes close unexpectedly after an update. | all | |
Mediatrix 3XXX Series units no longer close unexpectedly after an update. | |||
| DGW-5073 | Configuration script not working properly for subnet settings. | Dhcp | |
The subnet settings in the DHCP configuration were incorrectly exported using the configuration script. | |||
| DGW-5033 | The %capubip% macro used in a Registration Agent contact creates a Contact containing a port specified as ":0" | SBC | |
When the Sbc.RegistrationAgent.Contact parameter was configured with the %capubip% macro while the corresponding port was set to 0 in the Sbc.SignalingInterface table, the REGISTER request was sent with a Contact containing a port specified as ":0" . In this case, the Contact is now created without a port . | |||
| DGW-3981 | Syntax of the Nlm.SyslogRemoteHost parameter not validated. | Nlm | |
The syntax of the Nlm.SyslogRemoteHost parameter is now validated when a new value is set via the Web page, the Cli, Snmp, or a configuration script. The upgrade and restore functionalities are not affected by this validation. | |||
| --- | DGW-3341 | Running Config page is empty after downgrading the Dgw software from version 35.657. | Sbc service |
After downgrading the Dgw software from version 35.657 to a previous version, the "Running Config" page is empty. | |||
5 Known Issues
| Incident # | CR # | Synopsis | Applies To |
|---|---|---|---|
| --- | DGW-6418 | all | |
| Description is empty in issue RN (DGW-6418) | |||
| --- | DGW-6358 | all | |
| Description is empty in issue RN (DGW-6358) | |||
| DGW-4473 | The Mediatrix Sentinel 400 may restart when targeted by a specific SQL injection attack in SIP. | Sentinel 400 | |
An issue in the logging subsystem has been identified and corrected.The SBC logging subsystem no longer triggers the Sentinel to be restarted. | |||
| --- | DGW-2457 | Downgrading to version DGW 2.0. 37.697 and below causes the DGW application to stop responding and restart. | Sentinel 400 |
Downgrading to GA version DGW 2.0. 37 and below on a Sentinel 400, with analog cards and without a DSP card, causes the DGW application to stop responding and restart. When the DGW application restarts, the Telif service is stopped. For the unit to work properly, you will need to rollback to a DGW software version higher that 2.0.37.697. | |||
| --- | DGW-2046 | The LLDP service stops working. | all |
The LLDP service no longer stops working when there are no DHCP responses and the policy changes the VLAN id several times. | |||
| --- | DGW-1244 | The 1024k file limit capacity is not detected on units that support the Log To File. | all |
If more space than permitted is used, unwanted behaviours such as scripts not being properly executed or problems upgrading or downgrading DGW. | |||
| --- | DGW-1228 | Unable to install the Windows Server 2008 and 2003 from USB external device. | VM service |
It is not possible to use a USB external device to install the Windows Server image (2003 and 2008) OS when creating a virtual machine. | |||
6 Copyright Notice
Copyright © @CURRENT_DATE('YYYY') Media5 Corporation.
This document contains information that is proprietary to Media5 Corporation.
Media5 Corporation reserves all rights to this document as well as to the Intellectual Property of the document and the technology and know-how that it includes and represents.
This publication cannot be reproduced, neither in whole nor in part, in any form whatsoever, without written prior approval by Media5 Corporation.
Media5 Corporation reserves the right to revise this publication and make changes at any time and without the obligation to notify any person and/or entity of such revisions and/or changes.
Overview
Content Tools
Apps